Instructions / Assembly

12
"HI, MED, LOW" buttons:
These three buttons are used to set the fan
speed as follows:
LOW=Low speed
MED=Medium speed
HI=High speed
"FAN OFF" button:
This button turns the fan off.
The "LIGHT" button turns the light ON or
OFF and also controls the brightness setting.
Press and release the button to turn the light
ON or OFF. Press and hold the button to set the
desired brightness. The light button has an
auto-resume, it will stay at the same brightness
as the last time it was turned off.
"OFF-ON " Slide Button:
This button turns the power off and on to the
Fan and Light(s).
1.
2.
3.
4.
Restore power to the ceiling fan and test for
proper operation.
Figure 24
Operating Your Transmitter
Figure 25
Figure 26
Warm weather - (Counter-Clockwise direction)
A downward air flow creates a cooling effect.(Fig.
25) This allows you to set your air conditioner on
a higher setting without affecting your comfort.
Cool weather - (Clockwise direction) An upward
airflow moves warm air off the ceiling area. (Fig.
26) This allows you to set your heating unit on a
lower setting without affecting your comfort.
NOTE
WAIT FOR FAN TO STOP BEFORE REVERSING
THE DIRECTION OF THE BLADE ROTATION.
Speed settings for warm or cool weather depend
on factors such as the room size, ceiling height,
number of fans, etc.
The reverse switch is located on the top of motor
housing. Slide the switch to the left for warm
weather operation. Slide the switch to the right for
cool weather operation.