Instructions / Assembly

Assembly — Hanging the Fan (continued)

Standard ceiling mounting

□ Slide the canopy (C) up to the ceiling. Make sure you

have placed the wires safely into the outlet box (NN).

□ Secure the canopy (C) to the mounting bracket (A)

with the four screws and lock washers (BB) included

with your fan.

□ Slide the canopy ring (B) over the canopy (C) and

tighten by turning the canopy ring (B).

WARNING: The locking slots of the canopy (C) are provided

only as an aid to mounting. Do not leave the fan assembly

unattended until all four canopy screws are engaged and

ﬁrmly tightened.

WARNING: Make sure the tab on the mounting bracket (A)

properly sits in the groove in the hanger ball (E) before

attaching the canopy (C) to the mounting bracket (A) by

turning the canopy housing until it drops into place.

Close-to-ceiling mounting

□ Remove the fan from the hook on the mounting

bracket (A).

□ Secure the canopy (C) to the mounting bracket (A)

with the four screws with lock washers (BB).

□ Slide the canopy ring (B) over the canopy (C) and

tighten by turning the canopy ring (B).

WARNING: Locking slots of the canopy (C) are provided

only as an aid to mounting. Do not leave the fan assembly

unattended until all four canopy screws are engaged and

ﬁrmly tightened.

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.