Instructions / Assembly

1
2
4
Attach the support bar (B) to the chair top (A) by using two
small bolts (Fa) through two small washers (Fc), through the
support bar (B) and into the chair top (A).
Do not tighten completely. Repeat procedure for the other side.
Secure tighten all the bolts at this step.
Attach the “T” shaped connector (C) to the support bar (B) by using
two long bolts (Fb) through two large washers (Fd), through support
bar (B), through “T” shaped connector (C), through two lock (Fe) and
secure with two nuts (Ff).
Secure tighten all the bolts and nuts at this step.
3
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Attaching the support bar to the
chair top
Attaching “T” shaped connector to the
support bar
Inserting the center post (D) into
the base (E)
Installation
A
B
Fa
Fc
C
B
Fb
Fd
Fe
Ff
D
E
4
Inserting the assembled body into the base
Insert the assembled body into the base and twist left and right
if necessary.
Your swivel rocker is now ready for use.
Repeat procedure for the other ve chairs.