Installation Guide

17
5
On a 1/8" drill bit, set tape or drill depth gauge at 2-1/2".
Before drilling the face frames, re-check for level and that alignment between face
frames is exact.
Drilla1/8"pilothole,2-1/2"deepthroughtherstfaceframeandintothesecond
face frame. Drill bit must be 2-1/2" or less to avoid drilling completely through the
second face frame.
Drilla7/32"clearancehole,1-1/2"deepthroughthepilotholeintherstfaceframe.
Tomakescrewdrivingeasier,rubparafnorbee’swaxonthescrews.
GENERAL INFORMATION INSTALLATION REQUIREMENTSPRE-INSTALLATION INSTALLATION
FRAME-TO-FRAME ATTACHMENT
Drill 1/8" pilot hole 2-1/2"
deep, then 7/32" clearance
hole through first face frame.
Screw
Clamp
Clamp
Screwdriver
Base Cabinet
Level Line
Face Frame
Drill