Installation Guide

20
ATTACHMENT TO WALL (CONTINUED)
To avoid 'breakout' or 'splintering' of cabinet back, don’t press hard while drilling.
Use a sharp bit and let the bit do the drilling gradually.
INSTALLER NOTE: For wall cabinets, drill 2" down from the top and 2" up from
the bottom at the stud locations. For tall cabinets under 36" wide, drill 2" down
from the top and through the center of the hang rail that is ¼ of the way up from
the bottom.
GENERAL INFORMATION INSTALLATION REQUIREMENTSPRE-INSTALLATION INSTALLATION
Measurement
Taken from Wall
Measurement
Taken from Wall
2" Up from Bottom
2" Down from Top
Top Hang Rail
Hang Rail
Bottom Hang Rail
Wall Stud Location
2" Down from Top
Wall Stud Location
Spacer
Spacer