Installation Guide

25
BASE BLIND CORNER CABINETS (CONTINUED)
Position the hidden end of the base blind corner cabinet at the proper spacing from
the wall. The spacing is determined by the opposite end of the row of cabinets; this
dimension should be noted on your project layout.
Pushtheadjacentcabinet(withllerattached)againstthebaseblindcornercabinet.
Attach clamps between the center stile of the base blind corner cabinet and the face
frame of the adjacent cabinet.
Follow the Frame-to-Frame Attachment section requirement to align and join the center
stileofthebaseblindcornercabinetandthellerattachedtotheadjacentcabinet.Be
suretodrillasclosetocenterofthelleraspossible.
Ifyourllerhasapanelattached,drilltwomorepilotholesthroughtheframeintothe
panel and fasten with 1-1/4" screws. (Purchase separately.)
GENERAL INFORMATION INSTALLATION REQUIREMENTSPRE-INSTALLATION INSTALLATION
Screw 23" long counter
top brace into wall studs.
Face Frame Center Stile
Top View
Clamp together and
screw at top and bottom.
Filler allows for clearance for
drawer pulls and door swing.
Blind Corner Panel
Base Cabinet Level Line
Level side to side.
Plumb