Installation Guide

29
14
The refrigerator end panel conceals the side of a refrigerator and supports a 24" deep
wall cabinet above. Refrigerator end panels are shipped without a Toespace Cutout and
must be inverted for left- or right-hand use before marking and cutting the Toespace.
Determine whether the application is left- or right-hand. Measure the Toekick height and
depth from an adjacent base cabinet and transfer these dimensions to the proper end of
the refrigerator end panel. Follow dimensions to cut out the Toespace.
Put refrigerator end panel in place. Align the top of the refrigerator end panel either to
the Wall Cabinet Top Level Line or to the top of an adjacent wall cabinet.
If needed, shim the refrigerator end panel so the face frame is plumb and lined up with
the bottom of the base cabinet. Attach the end panel to the adjacent cabinet according
to the Frame-to-Frame Attachment section requirements.
Use angle brackets or backer board (not provided) to attach the back edge of the
refrigeratorendpaneltothewallandoor.Ifneeded,installllerbetweenawallcabinet
and the refrigerator end panel. After one refrigerator end panel is installed, install the 24"
deep wall cabinet according to the deep wall cabinet requirements.
Install the refrigerator end panel for the opposite side, if applicable.
GENERAL INFORMATION INSTALLATION REQUIREMENTSPRE-INSTALLATION INSTALLATION
REFRIGERATOR END PANEL AND
24" DEEP WALL CABINET INSTALLATION
Anchor to floor
and wall.
Refrigerator End Panel Left Hand
Refrigerator End
Panel Left Hand
Refrigerator End
Panel Right Hand
Top Wall Cabinet Level Line
24" Deep Wall Cabinet
12" Deep
Wall Cabinet
Filler 24" Deep Wall Cabinet
24" Deep
Base Cabinet
Refrigerator End Panel Right Hand
Filler or Tall Forward
Panel (if Needed)