Installation Guide

31
GENERAL INFORMATION INSTALLATION REQUIREMENTSPRE-INSTALLATION INSTALLATION
Drill 11/64" holes from the front side of the door for decorative hardware. It is
recommended to apply masking tape on both sides of the door stile and drawer
assembliesinordertoreducetear-outwhendrilling.Thisisalsobenecialfor
marking the drilling hole location.
It is recommended on full overlay door styles to keep the door ajar when drilling through
the stile so the drill bit does not strike the cabinet frame.
Countersinking the hardware screws to the proper depth will prevent the screw heads
from striking the cabinet frames during normal operation.
17
HARDWARE
INSTALLER NOTE: Some door styles may have holes on the back that were
used in the nishing process. These should not be used as pilot holes to mount
the hardware.
Right
Wrong