Installation Guide

8
GENERAL INFORMATION INSTALLATION REQUIREMENTSPRE-INSTALLATION INSTALLATION
PRE-INSTALLATION (CONTINUED)
Whether you start at a corner or an end, the general approach with wall cabinet
installation is to:
1. Mark on the back of the cabinet where the cabinet will line up with the wall studs
(See further instructions on page 13.)
2. Pre-drill the hang rails at the stud locations
3. Position the cabinet with a support
4. Loosely attach the cabinet to the wall (or ceiling for peninsulas)
5. Shim and level
6. Attach the face frames together
7. Tighten the cabinet to the wall (or ceiling for peninsulas)
Byinstallingthewallcabinetsrst,youwon’thavetoreachoverthebasecabinetsto
install the wall cabinets. This will lessen the likelihood of damage to base cabinets during
the installation process.
Double check the height of your tall cabinets against their intended location on your
projectlayout.Besuretoconsidersofts,andhowthetallcabinetswilllineupwith
surrounding cabinets.
INSTALLING WALL CABINETS
TALL CABINETS