Instructions / Assembly

10 www.hamptonbay.com
Please contact 1-877-527-0313 for further assistance.
Care & Cleaning
□ Before servicing or cleaning unit, disconnect the
power supply at the panel and lock to prevent the
power from being turned on. If the panel cannot be
locked, clearly mark the panel with a warning tag
to prevent the power from being turned on.
□ Remove grill by squeezing springs and pulling
down.
□ Wash and clean the grill in a sink and dry with a
cloth.
□ Remove dust and dirt from the fan housing with a
vacuum cleaner.
□ Dampen cloth with dish detergent, wipe the fan
housing and dry with a cloth.
□ Replace the grill.
□ To reduce the risk of fire, always vent fans to the
exterior and in compliance with local codes. Do
not vent exhaust air into spaces within walls,
ceilings, attics, crawl spaces, or garages.
□ Unplug or disconnect the appliance from the
power supply before servicing.
CAUTION: Do not use solvents, thinner or harsh
chemicals for cleaning the fan.
CAUTION: Do not allow water to enter the motor.
CAUTION: Do not immerse resin parts in water
over 140 ° F (60° C).
Specifications
Model No. BPT12-13D
Air direction 70 cfm
Voltage 120 V
Hertz 60 HZ
Duct diameter 3 in. (7.62 cm)
Noise 4.0 Sone
Power consumption (Watts) 49 W
Speed 1680 rpm
Air deliver at 0.1" WG 70 cfm
Weight 3.2 lbs. (1.45 kg)
DIMENSIONS
Ceiling opening - length 7.67 in. (19.48 cm)
Ceiling opening - width 7.48 in. (19 cm)
Ceiling opening - depth 3.94 in. (10.01 cm)
Housing dimension - length 7.48 in. (19 cm)
Housing dimension - width 7.28 in. (18.49 cm)
Housing dimension - depth 3.74 in. (9.5 cm)