Instructions / Assembly

6
Installation - New Construction
CAUTION: Make sure power is switched off at service panel
before starting installation.
NOTE: Ceiling mount only.
1
Attaching the duct connector
□ Attach duct connector (C) to the fan housing (A) as shown
in the drawing.
A
C
2
Removing the wiring box housing
□ Remove the wiring box cover from the fan housing with a
Phillips head screwdriver (not included).
□ Remove the wiring knockout from the wiring box cover
with a athead screwdriver (not included).
3
Placing the fan housing
□ Place the fan housing next to a ceiling joist or wall stud.
The fan housing should be level and perpendicular to the
joist or stud (1).
1
4
Mounting the fan housing
□ Mount the fan housing to the joist using four long wood
screws (D) where indicated.
D