Instructions / Assembly

8
Installation - Existing Construction
CAUTION: Make sure power is switched off at service panel
before starting installation.
1
Removing the existing fan
□ Remove the old fan from the ceiling.
2
Measuring the ceiling opening
□ Measure the opening to assure it is large enough to
accommodate the new fan body (A) (7.60 in. x 7.30 in.).
NOTE: 7.30 in. side of opening should be ush with the joinst.
3
Enlarging the opening (optional)
□ If this fan is not replacing an old fan, be sure to cut a
7.60in. x 7.30 in. opening for the fan body (A).
□ ENSURE THE 7.30 IN. SIDE OF THE OPENING IS FLUSH WITH
THE JOIST FOR INSTALLATION FROM BELOW.
7.60"
7.30
"
4
Attaching the duct connector
□ Attach duct connector (C) to the fan housing (A) as shown
in the drawing.
A
C