Instructions / Assembly

8
Installation (continued)
6
Using quick connect
7
Connecting wiring from unit to
house
WARNING: Wiring must comply with all applicable
electrical codes. Turn OFF power before removing or
installing connectors.
WARNING: COPPER TO COPPER ONLY. Do not use on
Aluminum wire.
CAUTION: Accessory part AA (quick connect) should meet
installation instructions below.
NOTE: Connector is reusable on solid wires of the same
wire gage or smaller. Do not reuse connector on stranded
wires.
□ Strip the wires so half of the bare wire is showing.
□ Grip the wire firmly and push the stripped end of the wire
into the open port of connector (AA). Use only one stripped
end of the wire per port.
□ Verify the stripped end of the wire is fully inserted to the
back of the connector (AA).
NOTE: Important wire information. Maximum temperature
rating 105°C (221°). 600 volts maximum for building wire
and 1000 volts maximum in signs and lighting fixtures.
Flammability rating of the wires must meet UL94-V2. The
acceptable wire range includes: Solid: 12-20 AWG, Stranded:
12-16 AWG (≤19 STRAND); 18AWG (7 STRAND), Tin bonded:
14-18 AWG (≤19 STRAND).
WARNING: Make sure that the main power is off
WARNING: Failure to wire this product correctly could
result in electrical shock, fire hazards, or damage to the
product. Consult a licensed electrician if you are unsure of
your ability to correctly install wiring.
CAUTION: If your house wires do not match these colors,
determine what each house wire represents before
connecting. You may need to consult a licensed electrician to
determine this safely.
□ Connect wires using the quick connector (AA) or wire nut
(not provided).
□ Connect the green (or bare) ground wire to the green
ground lead.
□ Connect the black wire from the unit to the black house
120V AC line.
□ Connect the white wire from the unit to the white house
120V AC line.
□ Replace the junction box cover. Do not pinch the lead wires.
□ Connect the red wire of the Night Light to the black house
120V AC line.
Product wires
House wires
AA
motor
Blue wire
Automatic terminal switch
to switch
to neutral
to switch
to neutral
to ground
to ground
to switch
to neutral
White wire
White wire
Blue wire
White wire
Green wire
Green wire
Junction box
Night Light
Light housing
Up to 13 watts
Up to 4 watts
Up to 13 watts
Capacitor for
long life of motor
to 120V AC 60Hz
Black wire
White wire
Insert the wire
into quick connector
AA
Red wire