Installation Guide

ManualsBrandsHampton Bay ManualsKitchen11.77x35.98x0.79 in. Decorative Wall End Panel in Butterscotch

PREPARATION

Select hardware that is best suited for

the applicable wall type.

CONCRETE

Drill ¼" holes, insert #10 wall anchors and

secure to wall with #10 x 2-½" screws.

STUDS

Secure to wall with #10 x 2-½" screws.

PACKAGE CONTENTS

• Adjustable shelves (quantity varies by box size)

• Shelf pins (4 per shelf)

• Hanging rail (wall cabinets only)

TOOLS NEEDED (NOT INCLUDED)

• Phillips head screwdriver

• #10 x 2-½" washer-head cabinet box installation screws

•

⁄8",

⁄32",

⁄16",

⁄4" drill bits

• Straight edge

• Tape measure

• Wood shims

• 1" Wood screws

• Drill

• Marking tool

• Level

• Stud finder

• Clamps

HERRAMIENTAS NECESARIAS (NO INCLUIDAS)

• Desarmador con punta Phillips

• # 10 x 2-½" tornillos con cabeza de rondana para instalación

• Taladro con brocas de

⁄8 ",

⁄32",

⁄16 ",

⁄4"

• Regla

• Cinta de medir

• Cuñas de madera

• Tornillos de madera de 1”

• Taladro

• Herramienta para marcar

• Nível

• Buscador de barrotes

• Prensas

COMPONENTES

• Repisas ajustables (la cantidad varía según el tamaño de la caja)

• Pasadores para repisas (4 por repisa)

• Riel para colgar (solamente en gabinetes de pared)

PREPARACIÓN

Seleccione la herramienta más adecuada

para el tipo de pared.

CONCRETO

Taladre orificios de ¼", inserte anclas de

expansión #10 y fijela a la pared con

tornillos #10 x 2-½".

BARROTES

Fijelo a la pared con tornillos #10 x 2-½".

Please call 1-800-235-7747

Favor de llamar al 1-800-235-7747

Monday - Friday, 8 a.m. - 5 p.m., CST

Lunes - Viernes, 8 a.m. - 5 p.m., CST

Installation Guide

Guía de instalación

Questions, problems, missing parts?

Preguntas, problemas, partes faltantes?

Summary of content (8 pages)

PAGE 1
Installation Guide Please call 1-800-235-7747 Guía de instalación Questions, problems, missing parts? Preguntas, problemas, partes faltantes? Favor de llamar al 1-800-235-7747 Monday - Friday, 8 a.m. - 5 p.m., CST Lunes - Viernes, 8 a.m. - 5 p.m.
PAGE 2
DESIGN TIPS When installing a wall cabinet next to a tall cabinet, a filler is recommended (not included). This will help prevent the wall cabinet door from rubbing on the side of the tall cabinet. CONSEJOS DE DISEÑO Al instalar un gabinete de pared al lado de otro alto, se recomienda usar un relleno (no incluido). Esto evitará que la puerta del gabinete de pared roce el lateral del gabinete alto. STEP 1 Prepare for cabinet installation.
PAGE 3
2 1 3 16.19cm wall - pared 1 horizontal line 6 3⁄8" línea horizontal 2 hanging rail riel para colgar 3 wall studs barrotes STEP 3 Remove all cabinet doors for ease of installation. Remove all the cabinet doors from the cabinets by loosening screw from hinge plate and pull the hinge out and away from the cabinet box to remove the door. Carefully stack doors out of the way to prevent damage. Remove shelves and hanging rails from wall cabinets.
PAGE 4
STEP 5 Wall cabinet installation. Always start with corner cabinets: blind wall or diagonal corner Blind wall cabinet pull dimensions X: Minimum pull Y: Maximum pull Z: Minimum filler size required between cabinets (Filler sold separately) PASO 5 Instalación del gabinete de pared.
PAGE 5
STEP 6 Installing adjacent wall cabinets. Continue with the wall box installation by placing the next cabinet on the wall hanging rail. Be careful to line up the bottom horizontal edges. Fasten the two cabinets together using clamps and clamp the cabinet sides firmly. Be sure the adjoining cabinets are flush and level with each other. Use 1" wood screws (not included) to attach the cabinets together. Fasten the adjoining cabinets to the wall as previously mentioned in step 5.
PAGE 6
CORNER BASE WITH LAZY SUSAN Locate and mark all stud locations. Install 2" x 4" framing material (not included) as cleats to support the countertop. Install cleats at base cabinet height (see step 1) and use level to ensure cleats are level. Drill 3⁄16" pilot holes through the cleat. Mount the cleat to the wall with #10 x 2-½" washer head cabinet box installation screws (not included) into the holes until they are tight.
PAGE 7
1 1.5" 3.81cm 2 1 wall stud barrote 2 cabinets top back rail riel superior del gabinete COUNTERTOP - PROPERLY BUILD UP YOUR COUNTERTOP TO ALLOW CLEARANCE TO OPEN DOORS AND DRAWERS. MOSTRADOR - INSTALE BIEN EL MOSTRADOR DEJANDO EL ESPACIO NECESARIO PARA QUE LAS PUERTAS Y LOS CAJONES ABRAN FACILMENTE. STEP 9 Drawer front installation & adjustment. Full extension drawer glide installation: Completely close both slides attached to the cabinet.
PAGE 8
Adjustment: All doors feature 6-way adjustable hinges. “Up or down”, “side to side” and “in and out” adjustments are shown in the image below. PASO 10 Instalación de la puerta. Instala las puertas después de que todos los frentes de cajones estén fijados. Coloca la puerta en la placa de montaje de bisagra, ubicada en el panel de extremo, alineando los dientes de la bisagra inferior con la parte posterior de la placa inferior de montaje. Ajuste: Todas las puertas tienen bisagras ajustables de 6 posiciones.