Instructions / Assembly

Turning the light on

 Turn the light switch on to activate the ﬁxture.

Operation

Care and Cleaning

 Clean the lamp with a soft, dry cloth.

 Do not use any cleaners with chemicals, solvents, or harsh abrasives.

Troubleshooting

Problem Possible Cause Solution

Replace the light bulb. The bulb is burned out. The bulb will not light.

The power is off. Ensure the power supply is On.

Check the wiring. There is a faulty wire connection.

Ensure the circuit breaker is in the On position. The circuit breaker is off.

Check the wire connections. The fuse blows or circuit

breaker trips when the

light is turned on.

There are crossed wires or the

power wire is grounding out.

Contact a qualiﬁed electrician or call the Customer Service Team at

1-855-HD-HAMPTON

 When the product is placed on a live tree, the tree should be well maintained and fresh. Do not place on live trees in which the

needles are brown or break off easily. Keep the tree holder ﬁlled with water.

 If the product is placed on a tree, the tree should be well secured and stable.

 Before using or reusing, inspect product carefully. Discard any products that have cut, damaged or frayed wire insulation or cords,

cracks in the lampholders or enclosures, loose connections, or exposed copper wire.

 When storing the product, carefully remove the product from wherever it is placed, including tree, branches, or bushes, to avoid any

undue strain or stress on the product conductors, connections, and wires.

 When not in use, store neatly in a cool, dry location protected from sunlight.

Replace the fuse:

1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.

2. Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades.

3. Remove fuse carefully.

4. Risk of ﬁre. Replace fuse only with 5 Amp, 125 Volt fuse (provided with product).

5. Close fuse cover. Slide closed the fuse access cover on top of attachment plug.

6. Risk of ﬁre. Do not replace attachment plug. Contains a safety device (fuse) that should not be removed.

DISCARD PRODUCT IF THE ATTACHMENT PLUG IS DAMAGED.

User Servicing Instructions