Instructions / Assembly
Installation
5 Please contact 1-855-HD-HAMPTON for further assistance.
HAMPTONBAY.COM
3
Securing the light fixture
Secure the light fixture (A) to the junction box by placing
over the support screws on the mounting
unit (AA) and securing it with the cap nuts (DD).
A
4
Installing the light bulbs
Remove the preinstalled socket rings (FF) from the light
fixture (A).
Secure the glass shades (B) to the light fixture (A) with the
previously removed socket rings.
Install 4 E26 60-watt bulbs (not included)
.
1
Attaching the mounting unit to the
junction box
Making the electrical connections
2
AA
DD
A
B
FF
AA
EE
CC
BB
AA
Screw the support screws (CC) into the mounting unit
(AA). Secure with the two nuts (EE).
Attach the mounting unit (AA) to the junction box (not
included) with mounting screws (BB).
NOTE: The support screws (BB)on the mounting unit
(AA) should protrude outaway from the junction box.
Connect the copper wire on the light fixture (A) to the
mounting unit (AA) by securing it with the pre-installed
ground screw.
Connect the black to black wire (power), the white to
white wire (neutral), and the copper wire to the ground wire
with wire nuts (GG) and secure with electrical tape
(not included).
NOTE: If the wires from the fixture are the same color,
attach the side with markings or letters to the black
(positive) wire and the other to the white (neutral) wire.
GG