Instructions / Assembly

Installation

5 Please contact 1-855-HD-HAMPTON for further assistance.

HAMPTONBAY.COM

Securing the light ﬁxture

 Secure the light ﬁxture (A) to the junction box by placing

over the support screws on the mounting

unit (AA) and securing it with the cap nuts (DD).

Installing the light bulb

 Install the shades (B) on the light ﬁxture (A).

 Install one E12 60-watt bulb (not included)

Attaching the mounting unit to the

junction box

Making the electrical connections

 Connect the copper wire on the light ﬁxture (A) to the

mounting unit (AA) by securing it with the pre-installed

ground screw.

 Connect the black to black wire (power), the white to

white wire (neutral), and the copper wire to the ground wire

with wire nuts (CC) and secure with electrical tape

(not included).

NOTE: If the wires from the ﬁxture are the same color,

attach the side with markings or letters to the black

(positive) wire and the other to the white (neutral) wire.

NOTE: The pre-installed support screwson the

mounting bracket (AA) should protrude outaway

from the junction box.

 Remove the preinstalled cap nuts (DD) from the mounting

unit (AA) and place them in a safe location.

 Attach the mounting unit (AA) to the junction box (not

included) with mounting screws (BB).