Instructions / Assembly

3 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-installation
PLANNING INSTALLATION
Read all instructions before assembly and installation.
To avoid damaging this product, assemble it on a soft, non-abrasive surface, such as carpet or cardboard. Inspect each
part for defects that may have occurred during shipping. Keep your receipt and these instructions for proof of purchase.
TOOLS REQUIRED
Safety goggles Phillips screwdriver Flathead screwdriver Pliers
Wire strippers Wire cutters Step ladder Electrical tape
HARDWARE INCLUDED
Part Description Quantity Part Description Quantity
AA Wire nut 2 HH Screw collar nut 1
BB Cross bar 1 II Screw collar loop 1
CC Ground screw 1 JJ Acrylic beads with pendant 3
DD Outlet box screw 2 KK Acrylic beads with ball 1
EE Hex nut 1 LL Acrylic beads with pendant 3
FF Lock washer 1 MM Small acrylic bobeche 3
GG Nipple 1 NN Medium acrylic bobeche 1
NOTE: This light fixture requires the use of
three 60- Watt max., candelabra base bulbs
(not included). Do not exceed the recommended
wattage.
NOTE: Hardware not shown to actual size.

