Installation Guide

Page 6
PARTS INCLUDED FOR INSTALLATION (parts are not to scale):
INSTALLATION INSTRUCTIONS:
1. Fasten the mounting bar (#23) to the Outlet Box (#35) using the two provided outlet
box screws (#25).
2. Secure hex nut (#27) on the nipple (#28) after placing the lock washer (#26) on the
nipple (#28).
3. Thread nipple (#28) on the mounting bar (#23) until hex nut (#27) is tight
4. Secure collar loop (#30) into nipple (#28) then use one quick link (#31) to connect
collar loop (#30) and the top of chain (#33) and another quick link (#32) to link to loop
(#9) at the bottom of chain (#33).
5. Place the lead wire and ground wire through the chain (#33), collar ring (#34), canopy
(#29) and nipple (#28).
6. Connect the neutral wire (ribbed) from the fixture to the white wire from the outlet box
(#35) and the live wire (smooth) from the fixture to the black wire from the outlet box
(#35). Cover the two wire connections using the two provided wire connectors (#22).
Wrap the two wire connections with electrical tape for a more secure connection.
Connect the copper ground wire from the fixture and from the outlet box (#35) to the
ground screw (#24) on the mounting bar (#23). Note: If you have electrical questions,
consult your local electrical code for approved grounding methods.
7. After the wires are connected, tuck them carefully inside outlet box (#35), place the
canopy (#29) on the ceiling and secure collar ring (#34).
8. Installation is complete. Turn on the power at the circuit breaker or fuse box. Turn the
light switch on to activate the fixture.