Instructions / Assembly

Page 6
PARTS INCLUDED FOR INSTALLATION (parts are not to scale):
2ea Lock Nuts (#2) 3ea Wire Connectors (#19)
2ea Mounting Screws (#20)
1ea Mounting Strap (#21) 1ea Ground Screw (#22) 2ea Outlet Box Screws (#23)
INSTALLATION INSTRUCTIONS:
1. Screw the two Mounting Screws (#20) into the Mounting Strap (#21). Mount the
Mounting Strap (#21) to the Outlet Box (#18) using the two Outlet Box Screws
(#23). [Make sure the threads of the Mounting Screws (#20) are facing outside
when the Mounting Strap (#21) is attached to the Outlet Box (#18).]
2. Wrap the ground wire from the fixture around the Ground Screw (#22) on the
Mounting Strap (#21), and then connect the ground wire from the fixture to the
ground wire from the Outlet Box (#18). Connect the wire without writing on it
(with raised ribs) from the fixture to the white wire (neutral wire) from the Outlet
Box (#18). Connect the wire with writing on it from the fixture to the black wire
(live wire) from the Outlet Box (#18). Cover the three connections using the three
Wire Connectors (#19). Wrap the three wire connections with electrical tape for a
more secure connection. Position the wires back inside the Outlet Box (#18). Note:
If you have electrical questions, consult your local electrical code for approved
grounding methods.
3. Place the Canopy (#1) against the Outlet Box (#18) by aligning the protruding
Mounting Screws (#20) all the way through the holes on the Canopy (#1). Tighten
the fixture to the ceiling by screwing the two Lock Nuts (#2) onto the two
protruding Mounting Screws (#20).
4. Installation is complete. Turn on the power at the circuit breaker or fuse box. Turn
the light switch on to activate the fixture.