Instructions / Assembly

DESIGN TIPS
When installing a wall cabinet next to a tall cabinet, a filler is recommended (not included). This will help prevent the wall
cabinet door from rubbing on the side of the tall cabinet.
CONSEJOS DE DISEÑO
Al instalar un gabinete de pared al lado de otro alto, se recomienda usar un relleno (no incluido). Esto evitará que la puerta del gabinete de pared roce
el lateral del gabinete alto.
STEP 1
Prepare for cabinet installation. Remove base boards and other objects on the wall area where cabinets are to be installed.
Using a straight edge and a level, find the high point in the floor where the boxes are to be installed. From the high point, mark
a level horizontal line on each wall where the cabinets will be attached. Mark another horizontal line 34.5" above the horizontal
base line. This line will indicate the height of all base cabinets. From those lines, mark another horizontal line 54" up for the
bottom of wall cabinets and mark another line that represents the top of the wall cabinets.
PASO 1
Preparación para instalación. Retira las tablas de base y otros objetos del área de la pared donde se instalarán los gabinetes. Con escuadra y nivel,
busca el punto alto del piso donde se instalarán las cajas. Desde el punto alto, marca una línea horizontal nivelada en cada pared donde se fijarán los
gabinetes. Marca otra línea horizontal a 87.6 cm por encima de la línea base horizontal. Esta línea indicará la altura de todos los gabinetes de base.
Desde esas líneas, marca otra línea horizontal a 1.4 m por encima de la parte inferior de los gabinetes de pared y marca otra línea más que indique la
parte superior de los gabinetes de pared.
STEP 2
Remove all cabinet doors for ease of installation. Remove all the cabinet doors from the cabinets by loosening screw from
hinge plate and pull the hinge out and away from the cabinet box to remove the door. Carefully stack doors out of the way to
prevent damage.
Remove shelves and hanging rails from wall cabinets.
PASO 2
Retira todas las puertas de los gabinetes para facilitar la instalación. Retira todas las puertas de los gabinetes aflojando el tornillo de la placa de
la bisagra y tirando de esta última para separarla de la caja del gabinete y así retirar la puerta. Apila las puertas con cuidado para evitar cualquier daño.
Retira repisas y riel para colgar de los gabinetes de pared.
34.5"
87.6cm
2
1
2
3
4
3
1
3
4
4
54"
1.4m
height of all base cabinets
altura de todos los gabinetes base
horizontal base line
línea horizontal de base
use level to find the highest leveled point
utilice nivel para encontrar el punto más alto
horizontal wall line
línea horizontal de pared
loosen screw
afloje tornillo
1