Instructions / Assembly

Assembly
6
E
F
Please contact 855-HD- HAMPTON for further assistance.
HAMPTONBAY.COM
1-
5
Attaching the base
□
7
□
Don't cut the string on the swing before assembled.
Attach the base (G) to the right arm (D) and the left arm (C).
Cut string in one swing of the base (G). Aligning the built-in
Place the seat cushion (E) and back cushion (F) on the chair.
□
This motion chair is now ready for your enjoyment.
Place the chair upside down.
□
Completing the assembly
□
Place the motion chair right side up.
bolts on the base with the holes on the arms. Half tighten
6
Pay attention
when 4 bolts attached the 2 arms. Two people working
on this part is recommended.Firstly,tighten all four bolts
Half tighten for each bolt first, fully tighten all the bolts
□
G
DD
DD
□
□
the bolts using the Hex wrench (DD).
Repeat setup 4 for other 3 three swing. Please remind don't
cut the string on the swing before assembled.
□
DD
half way by aligning in proper position.Tighten
completely afterward.