Instructions / Assembly

Table Assembly
Attaching the table legs Attaching the connector ring
□ Place the table top (A) on a soft, flat, non-abrasive surface.
Attach the table legs (C) to the table top (A) using the hex
bolts (DD) and washers (EE).
NOTE: Do not fully tighten bolts.
□
2
EE
DD
1
CC EE
FF
6
Turn the table top right side up
□ Turn the table over and set it down on its legs.
The table is now ready for use.
3
NOTE
: Please make sure all the bolts are assembled
A
C
B
Attach the connector ring (B) to the table legs (C) using
hex bolts (CC) and washers (EE). Tighten all bolts. Then
cover the bolt heads with hex bolt caps (FF).
correctly and use socket wrench (HH) to tighten.