Instructions / Assembly

2
1
5 HAMPTONBAY COM
A
Attaching the connector ring
ssembly
Attaching the table
Please
contact 1-855-HD-HAMPTON for further assistance.
legs
□
□
CC
BB
A
B
B
C
CC AA DD
A
D
Put the glass (D) into the table frame (A).
using the M6x25 mm bolt (AA) and M6 washer (CC).
M6x30mm bolts (BB) and M6 washers (CC).
Turn the table right side up.
surface.Attach the table legs (B) to the table frame (A) using
Attach the bolt caps (DD) to all bolts.
Attach the connector ring (C) to the table legs (B)
The table is now ready for use.
3
□ Place the table frame (A) upside-down on a soft, flat, non-abrasive
Do not fully tighten the bolts.
Ensure all bolts are aligned and assembled correctly.
Positioning the table
Fully tighten all the bolts with the hex wrench (EE).
BB
DD