Instructions / Assembly

21
5 HAMPTONBAY.COM
Assembly
Attaching the table legs
Positioning the table
Attaching the connector ring
Please contact 1-855-HD-HAMPTON for further assistance.
A
B
BB
CC
Place the table frame (A) upside-down on a soft, flat, non-abrasive
□
using M6x40mm bolts (BB) and M6 washers (CC).
using M6x25 mm bolts (AA) and M6 washers (CC).
Put the glass (D) into the table frame (A).
Turn the table right side up.
Place the umbrella ring (E) through the hole
in the center of the glass (D).
surface. Attach the table legs (B) to the table frame (A)
Attach the connector ring (C) to the table legs (B)
DDAACC
E
D
Fully tighten all the bolts with the hex wrench(EE).
Do not fully tighten the bolts.
Ensure all bolts are aligned and assembled correctly.
□
□
□
Attach the bolt caps (DD) on all bolts.
B
C
DD
BB
3
A