Instructions / Assembly

22 | Installation How-Tos Installation How-Tos | 23
Base Blind Corner Cabinets
During the “dry t” step, it is a good time to check the
blind corner cabinet spacing from the corner wall.
Dry t the cabinets tightly together, starting at the
end of the row of cabinets and butt against the Blind
Corner Cabinet. Mark the position where the end of
the Blind Corner Cabinet is spaced away from the
corner wall.
The Blind Corner Filler (provided with some products)
provides clearance between 90° cabinets for drawer
and door pull hardware. This ller may come with a
panel attached, depending on product.
Before moving the Base Blind Corner Cabinet
attach the Filler to the adjacent cabinet frame with
the method described in the Frame-to-Frame
Attachment section.
Attach a 23" countertop brace on the wall as
described previously.
Installation How-to’s
Base Blind Corner Cabinets
(continued)
Position the hidden end of the Base Blind Corner
cabinet at the proper spacing from the wall. The
spacing is determined by the opposite end of the
row of cabinets; this dimension should be noted
on the your project layout.
Push the adjacent cabinet (with Filler attached)
against the Base Blind Corner cabinet.
Attach clamps between the center stile of the
Base Blind Corner cabinet and the face frame of
the adjacent cabinet.
Follow the Frame-to-Frame Attachment
requirement to align and join the center stile of the
Base Blind Corner cabinet and the Filler attached
to the adjacent cabinet. Be sure to drill as close to
center of the Filler as possible.
If your Filler has a panel attached, drill 2 more pilot
holes through the frame into the panel and fasten
with 1-1/4" screws (purchase separately).