Instructions / Assembly

26 | Installation How-Tos Installation How-Tos | 27
Wall Filler; Base, Wall
Wall Fillers are available to ll gaps between the end of a
row of cabinets and a 90° wall.
INSTALLER NOTE: A Backer Board is required behind
the Wall Filler if the Filler is wider than 3". Attach the
Backer Board to the wall before installing the nal
cabinet.
To mark the Wall Filler and Backer Board positions, run
a straight edge across the space between the wall and
the closest cabinet. On the wall, mark behind the straight
edge. Draw a straight, vertical line from this mark using a
level. Align the front of the Filler on this mark. Mark behind
the Filler for the front position of the Backer Board.
Attach the Backer Board to the wall so it is plumb. Be
sure that the Backer Board is wide enough to be
fastened to the nearest wall stud.
Wall Blind Corner Cabinets (continued)
Check the Wall Outline for the distance the Blind Corner
cabinet is pulled away from the corner. The maximum distance
is 2-7/8". Transfer measurements, predrill, and fasten cabinet
to wall per Attachment to Wall requirements.
Before lifting adjacent cabinet to the Blind Corner cabinet,
attach the Filler to the adjacent cabinet in the same manner as
described for Base Blind Corner Cabinets.
Lift the adjacent cabinet (with Filler attached) and push against
the Blind Corner cabinet. Depending on your product, your
Filler may have a panel attached.
Clamp, align, shim, predrill, and fasten in the same manner as
described for Base Blind Corner Cabinets and Face-to-
Face Attachment.
Wall Outline
3” Maximum
Spacer
Shim as
Needed
“T” Brace
Ledger Board
Wall Cutline
Shim as
Needed
Blind Panel
Filler
“T” Brace
Looger Board