Instructions / Assembly
34 | Installation How-Tos Installation How-Tos | 35
Bookcase
Installation of a bookcase by itself is NOT recommended unless additional support such as attachment
to a soft or supported by a countertop. Bookcases that are 54" or 60" high are designed to mount on a
countertop and must be secured to the wall.
Follow the Minimum Attachment Requirements found earlier.
WARNING! Bookcase cabinets are subject to extreme weight. Bookcase cabinets
used for wall hung applications must be limited to 15 lbs. per sq. ft. of shelf area and should not be
hung on the wall. FAILURE TO FOLLOW THESE LIMITATIONS COULD CAUSE SERIOUS INJURY
AND WILL VOID THE PRODUCT WARRANTY.
WARNING! Special depth bookcase cabinets greater than 12" deep should not be used in wall
hung applications.
Vanity Sink Cabinets
Transfer the location of the supply and drain lines to the back or bottom of the cabinet. Using a hole saw,
cut openings 1/4" larger than that of the pipe at these locations.
Follow the Minimum Attachment Requirements found earlier.
Conversion of Vanity Drawers to False Front
The drawers can be changed to a false front if twin or off-center
sink bowl locations are required.
Remove the drawer. Unscrew the Drawer Front from the Drawer
Box. Unscrew the Drawer Guide from the Face Frame and pull the
guide out of the cabinet back.
Drill a 1/8" diameter 1/2" deep hole on each side of the drawer
opening in the face frame as shown; 2-11/16" from the bottom of
the drawer opening and 5/16" in from the front of the face frame.
Install the (2) plastic strikes in the holes drilled in the face frame
using the provided #8 X 1" pan head screws.
2
11/16"
5/16"
PAN HEAD SCREW
PLASTIC VENT STRIKE
1/8" DIAMETER x
1/2" DEEP