Instructions / Assembly

PARTS INCLUDED FOR INSTALLATION (parts are not to scale):
3 ea Wire Nuts (#10) 2 ea Mounting Screws (#8)
INSTALLATION INSTRUCTIONS:
1. Thread the Mounting Screws (#8) into the Outlet Box (#6) so that they extend
approximately ½” below the Ceiling (#7). (Fig. 3)
2. Pull the power supply wires out from the Outlet Box (#6). Attach the Black
Supply Wire (#14) to the Black Fixture Wire (#15) and the White Supply
Wire (#9) to the White Fixture Wire (#11) using Wire Nuts (#10). Connect the
Fixture Ground Wire (#12) and the Supply Ground Wire (#13) together using
a
Wire
Nut
(#
10
)
(Fig
3
)
Wrap
all
wire
connections
with
electrical
tape
for
a
a
Wire
Nut
(#
10
)
.
(Fig
.
3
)
Wrap
all
wire
connections
with
electrical
tape
for
a
more secure connection. Note: If you have electrical questions, consult your
local electrical code for approved grounding methods.
3. Carefully, tuck all the wires and wire connections into the Outlet Box (#6).
Pl
th
Fi t
P
(#
1
)
th
Otlt
B
(#
6
)
d
t
th
Mti
Pl
ace
th
e
Fi
x
t
ure
P
an
(#
1
)
ove
r
th
e
O
u
tl
e
t
B
ox
(#
6
)
an
d
on
t
o
th
e
M
oun
ti
ng
Screws (#8), making sure they feed through the Keyhole Slots (#16). (Fig. 4)
4. Slide the Fixture Pan (#1) in a direction, so that the Mounting Screws (#8)
slide into the narrow ends of the Keyhole Slots (#16). Tighten the Mounting
Screws (#8) so that the Fixture Pan is secured flush against the Ceiling (#7).
(Fig. 5 and 5-1)
5. Proceed to Step 3 of the Assembly Instructions.
Page 6
6. Installation is complete. Turn on power at the circuit breaker or fuse box.
Turn the light switch on to activate the fixture.