Instructions / Assembly

Page 10
DIMMING:
Although this product is compatible with most common residential type dimmers,
dimming performance depends on dimmer, dimmer setting (for dimmers with
brightness range adjustments), wiring method, and the number of LED modules.
For best results, set dimmer position at maximum before adjusting to a lower
light level.
Recommended Dimmers (minimum load of four LED modules for optimal
dimming performance):
Leviton Decora – 6631, IPI06; Lutron Skylark – S-603PGH, CTCL-153PDH ;
Lutron Diva – DVWCL-153PDH; Lutron Maestro – MACL-153M; Lutron
TGCL-153PH
Recommended Dimmer for 0-10V dimming: Levitron – IP710-DLZ
DIMMER WIRE CONNECTIONS FOR 0-10V DIMMING:
Follow the instructions provided
with the 0-10V Dimmer. Typically,
the PURPLE FIXTURE WIRE
connects to the PURPLE
DIMMER WIRE and the GRAY
FIXTURE WIRE connects to the
GRAY DIMMER WIRE.
LED
DRIVER
Purple: + Dimmer
Grey: – Dimmer
Red: + LEDs
Black: – LEDs
White: Neutral
Black: Line
FCC:
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. However, there is no guarantee that interference can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interface by one or more of
the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the device and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.