Instructions / Assembly

Page 6
PARTS INCLUDED FOR INSTALLATION (parts are not to scale):
INSTALLATION INSTRUCTIONS:
3 ea Wire Nuts (#10) 4 ea Mounting Screws (#8)
1. Place the Fixture Pan (#1) onto the desired location, centering it over
the Outlet Box (#6). Mark the location of all the Keyhole Slots
(#16).
2. Remove the Fixture Pan (#1) from the Ceiling (#7). Drill
appropriately sized Holes (#17) at the marked keyhole locations.
Insert the Ceiling Anchors (#18) into the Holes (#17). (Fig. 3)
3. Thread the Mounting Screws (#8) halfway into the Ceiling Anchors
(#18). (Fig. 3)
4. Pull the power supply wires out from the Outlet Box (#6). Attach the
Black Supply Wire (#14) to the Black Fixture Wire (#15) and the
White Supply Wire (#9) to the White Fixture Wire (#11) using Wire
Nuts (#10). Connect the Fixture Ground Wire (#12) and the Supply
Ground Wire (#13) together using a Wire Nut (#10). (Fig. 4) Wrap
all wire connections with electrical tape for a more secure
connection. Note: If you have electrical questions, consult your local
electrical code for approved grounding methods.
4 ea Ceiling Anchors (#18)