Use and Care Manual

5. Rotate the fan body manually clockwise or

counterclockwise, the maximum rotation

angle: 360°(Fig. 4).

Fig. 4

IMPORTANT: During the first few minutes of initial use, you may notice a slight odor.

This is normal and will quickly disappear.

TO CLEAN: Always disconnect the fan before cleaning. Light accumulated dust can be

removed by using a soft cloth to wipe away the dust at the back grille of the fan. Wipe the

exterior surfaces of the fan occasionally with a damp cloth (not dripping wet) and dry

thoroughly with a soft dry cloth before operating the fan. Do not use harsh cleaners or

materials to clean this unit, doing so will cause damages to it.

CAUTION: DO NOT ALLOW WATER TO RUN INTO THE INTERIOR OF THE FAN AS THIS

COULD CREATE A FIRE OR ELECTRIC SHOCK HAZARD. THE FAN MOTOR IS FACTORY

LUBRICATED FOR LIFE AND WILL REQUIRE NO FURTHER LUBRICATION. NO OTHER USER

MAINTENANCE IS REQUIRED OR RECOMMENDED. IF SERVICE IS REQUIRED, SEND YOUR

FAN TO THE AUTHORIZED SERVICE FACILITY.

TO STORE: Make sure to disassemble and clean the fan before storing. Retain the

original packaging for the purpose of storing your fan. Always store fan in a dry place.

Never store it while it is still plugged in. Never wrap the cord tightly around the fan, and

do not put any stress on the cord where it enters the fan, as it could cause the cord to

fray and break.

Care And Maintenance