Instructions / Assembly

ManualsBrandsHampton Bay ManualsLandscape Flood Lights & SpotlightsSolar Powered Color Changing Smart-Focus Spot Light

HAMPTONBAY.com

Please contact 1-855-HD-HAMPTON for further assistance.

Installation

TURNING THE SWITCH “AUTO”

□ Put the switch, located under the solar panel,

to the AUTO position.

ADJUSTING THE DIMMER SWITCH AND

SWITCHING COLORS

□ Using the dimmer switch (B) on the back

of the solar top housing (A) allows you to

adjust the focus of the Smart Focus™

Solar Spot Light.

□ Push the solar spot light asembly

into the ground.

Safety Information

Please note the following important safety notes:

1. The ground stake is sharp. Handle with care to avoid injury.

2. Clean the solar panel with a damp cloth. Do not use any chemicals or abrasives.

3. Keep the solar panel free of dirt and debris.

4. Do not dispose of battery in ﬁre. Dispose of batteries in accordance all local, state and

federal regulations.

WARNING: Do not use hammer. If ground is

hard, use water to soften.

DANGER: Ground stake is sharp. Handle with

care.

IMPORTANT: Dispose of batteries in accordance

with all local, state and federal regulations.

PACKAGE CONTENTS

Use and Care Guide

Solar Powered LED

Color-Changing Spotlight

Item #xxxx xxx xxx

Model #10238

Part Description Quantity

Solar Top Housing 1

B Dimmer 1

C Screw 1

ATTACHING THE SOLAR TOP HOUSING

TO THE GROUND STAKE

□ Align the ground stake (D)

to the screw (C) on the

solar top housing (A).

CAUTION: The ground stake

is sharp. Be careful when

handling to avoid injury.

□ Attach the ground stake (D)

to the solar top housing (A)

by tightening the screw (C)

using a clockwise motion.

Choosing the Right Location

Your solar spot light should be installed in an area that gets DIRECT SUNLIGHT.

Your solar spot light will produce more hours of operation when installed in an

area which is free from cover, shade, or shadowing.

□ Located under the solar panel, the Color Control

Button (E) allows you to manually cycle through

the colored LED options. You may also use the

use the remote (F) that is included.

INSERTING THE SOLAR SPOT LIGHT ASSEMBLY

INTO THE GROUND

Ground Stake

Color Contron Button

Remote

NOTE: Do not press hard on top

of solar top housing (A). This can

damage the solar light.

NOTE: Do not use a hammer.

If the ground is hard, use water

to soften.

NOTE: The remote (F)

functions best

within 5 meters

and at an angle

of 45°.

Summary of content (4 pages)

PAGE 1
Item #xxxx xxx xxx Model #10238 Use and Care Guide Solar Powered LED Color-Changing Spotlight PACKAGE CONTENTS Part A B Choosing the Right Location Description Quantity Solar Top Housing Dimmer 1 1 C Screw 1 D Ground Stake 1 E Color Contron Button 1 F Remote 1 Your solar spot light should be installed in an area that gets DIRECT SUNLIGHT. Your solar spot light will produce more hours of operation when installed in an area which is free from cover, shade, or shadowing.
PAGE 2
Replacing the Battery 1 REPLACING THE BATTERY □ Remove the solar top assembly (A) from the ground stake (D) by loosening the screw (C) with a counter-clockwise motion. 2 REPLACING THE BATTERY (CONTINUED) □ Remove the screws from the bottom of the solar panel (A) using a screwdriver (not included.) 3 REPLACING THE BATTERY (CONTINUED) □ Remove the battery cover (1) on the bottom of the solar panel (A). □ Remove the battery. NOTE: Use only Lithium Phosphate 18500 (3.
PAGE 3
Núm. de artículo xxxx xxx xxx Núm. de modelo 10238 Guía de uso y cuidado LED alimentado por energía solar Foco de cambio de color PAQUETE CONTENIDO Elección del lugar correcto Pieza Descripción Cantidad A B Carcasa superior solar Atenuador 1 1 C Atornille 1 D Estaca de suelo 1 E Botón de control del color 1 F Control remoto 1 Su foco solar debe instalarse en un área que obtenga LUZ SOLAR DIRECTA.
PAGE 4
Reemplazo de la batería 1 REEMPLAZO DE LA BATERÍA □ Retire el ensamblaje del panel solar (A) de la estaca de tierra (D) aflojando el tornillo (C) con un movimiento hacia la izquierda. 2 3 REEMPLAZO DE LA BATERÍA (CONTINUACIÓN) □ Retire los tornillos del fondo del panel solar (A) usando un destornillador (no incluido) REEMPLAZO DE LA BATERÍA (CONTINUACIÓN) □ Retire la cubierta de la batería (1) en el fondo del panel solar (A). □ Retire la batería.