Instructions / Assembly

HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
2
4
1
3
Assembly
□
□
□
H
H
CC
BB
DD
F
B
A
EE
B
C
D
E
I
AA
CC
using M6x25 mm bolts (BB) and M6 washers (CC).
Attach the bolt caps (DD) to all bolts.
using M6x15mm bolts (AA) and M6 washers (CC).
With the help of another person, carefully turn the
table right side up, then place the firepit bowl (E) into
the table as shown in picture.
surface. Attach the table legs (H) to the table top frame (F)
Attach the connector ring (G) to the table legs (H)
□
Fully tighten all the bolts with the hex wrench (FF).
The table is now ready for use.
AA
DD
G
□
□
surface.
Take the handle (A) and assemble to the mesh cover (B)
using the M8 nut (EE). Fully tighten the M8 nut (EE) with the
wrench (GG).
Put the log grate (D), the pot cover (C), and the mesh cover (B)
into the firepit bowl (E). Finally, put the poker (I) on the table
top frame (F). When the poker (I) is not in use, put it in the
firepit bowl (E).
Positioning the tableAttaching the handle to the
mesh cover
Attaching the table legs Attaching the connector ring
Place the mesh cover (B) on a soft, flat, non-abrasive
Place the table top frame (F) upside down on a soft, flat, non-abrasive
Do not fully tighten the bolts.
F
5