Installation Guide

FLOOR REGISTER INSTALLATION INSTRUCTIONS
Step one: Determine the correct size register by measuring the opening in the floor.
(Example: an opening that measures 4 x 10 will require a register labeled 4 x 10).
Step two: Open the register package and discard the cardboard and wrapping paper.
Step three: Simply set the register into the opening in the floor. There are no screws
required to hold the register in place.
Step four: Locate the damper adjustment device on the face of the register, and move
it to open or close the damper as desired.
DAMPER
HANDLE

Summary of content (1 pages)