INSTRUCTION MANUAL Low Voltage Track light White Finish Home Depot SKU 486-101 (UPC008938101868) 1
Thank you for purchasing this Hampton Bay interior track light. This product has been manufactured with the highest standards of safety and quality. FEATURES: 1. 2. 3. Uses 12V, MR16 type 50W Xenon bulbs (Included). Track head is multi-directional. Adapter can be located anywhere along the track section. QUESTIONS, PROBLEMS, MISSING PARTS: Before returning to your local Home Depot, please call our Customer Service Team at 1877-527-0313 or visit www.homedepot.com.
TOOLS REQUIRED FOR ASSEMBLY & INSTALLATION (not included): Ladder Gloves PARTS INCLUDED FOR ASSEMBLY (parts are not to scale): x1 bulb re-lamping tool x1 MRC16.50W bulb INSTALLATION: 1. 2. 3. 4. Push the top portion of the head adapter into the slot of the track section. Pull down the adapter’s locking tab. Turn “Ground Indicator” tab towards the ground groove on track to align ground tab with ground conductor. Adapter can move to any position along the track section.
TRACK (sold separately) GROUND INDICATOR GROUND INDICATOR GROUND GROOVE PUSH DOWN AND TWIST TO REMOVE FROM TRACK TROUBLE SHOOTING: Problem Light Bulb will not illuminate. Fuse blows or circuit breaker trips when light bulb is illuminated. Possible Cause 1. Light bulb is burned out. 2. Power is off. 3. Faulty wire connection. 4. Faulty switch. Crossed wires or power wire is grounding out. Corrective Action 1. Replace light bulb. 2. Make sure power supply is on. 3. Check wiring. 4.
MANUEL D’INSTRUCTIONS Éclairage sur rail à basse tension Fini blanc Home Depot UGS 486-101 (CUP 008938101868) 5
Merci d’avoir acheté cet éclairage sur rail d’intérieur de Hampton Bay. Cet article a été fabriqué selon les normes de sécurité et de qualité les plus rigoureuses. CARACTÉRISTIQUES : 1. 2. 3. Requiert une ampoule au xénon 50 W, 12 V de type MR16 (comprise). Le projecteur est multidirectionnel. L’adaptateur peut être placé n’importe où sur le rail.
OUTILS REQUIS POUR L’ASSEMBLAGE ET L’INSTALLATION(non compris) : Échelle Gants PIÈCES COMPRISES POUR L’ASSEMBLAGE (les pièces ne sont pas à l’échelle) : x1 Outil de remplacement d’ampoule x1 Ampoule MRC 16,50 W INSTALLATION : 1. 2. 3. 4. Enfoncer la partie supérieure de l’adaptateur de projecteur dans la rainure de la section de rail. Tirer la languette de verrouillage de l’adaptateur vers le bas.
RAIL (vendu séparément) INDICATEUR DE MISE À LA TERRE INDICATEUR DE MISE À LA TERRE POUSSER VERS LE BAS EN TOURNANT POUR LE RETIRER DU RAIL RAINURE MISE À LA TERRE DÉPANNAGE : Problème L’ampoule ne s’allume pas. Le fusible grille ou le disjoncteur se déclenche lorsque l’ampoule est allumée. Cause possible 1. L’ampoule est grillée. 2. Le courant est coupé. 3. Mauvais branchement. 4. L’interrupteur est défectueux. Un circuit ou un fil d’alimentation n’est pas mis à la terre. Solution 1.
MANUAL DE INSTRUCCIONES Luz de Riel de Bajo Voltaje Acabado Color Blanco Home Depot SKU 486-101 (UPC008938101868) 9
Gracias por comprar este riel flexible está lámpara de riel Hampton Bay. Este producto se ha fabricado con las normas de seguridad y calidad más altas. CARACTERÍSTICAS: 1. 2. 3. Usa bombillas de xenón tipo MR16 de 12V y 50W (Incluidas). El cabezal del riel es multidireccional El adaptador puede colocarse en cualquier parte del riel. PREGUNTAS, PROBLEMAS O PIEZAS FALTANTES: Antes de volver a The Home Depot, por favor llama a nuestro Equipo de Servicio al Cliente al 1-877-527-0313 o visita www.homedepot.
HERRAMIENTAS NECESARIAS PARA EL ENSAMBLAJE E INSTALACIÓN (no incluidas): Escalera Guantes PIEZAS INCLUIDAS PARA EL ENSAMBLAJE (no se muestran a escala): 1 herramienta para cambiar bombillas 1 bombilla MRC16 de 50W INSTALACIÓN: 1. 2. 3. 4. Presiona la parte superior del adaptador del cabezal contra la ranura en el riel. Tira de la pestaña de fijación del adaptador. Gira la pestaña de “indicador a tierra” hacia la ranura a tierra sobre el riel para alinear la pestaña a tierra con el conductor a tierra.
RIEL (se vende por separado). INDICADOR A TIERRA INDICADOR A TIERRA EMPUJAR HACIA ABAJO Y GIRAR PARA RETIRAR DEL RIEL RANURA A TIERRA SOLUCIÓN DE PROBLEMAS: Problema La lámpara no se enciende. Causa Posible 1. La bombilla se fundió. 2. No hay electricidad. 3. Conexión defectuosa del cable. 4. Interruptor defectuoso. El fusible se funde o el cortacircuitos se activa en el momento en que enciendes la luz. Los cables están cruzados o el cable de alimentación está haciendo tierra. Solución 1.