Use and Care Manual
2
Thank you for purch
asing this Hampton Bay
interior
cabinet
light
kit
. This product has been manufactured with the
highest standards of safety and quality.
FEATURES:
1. 6 Light, Xenon under cabinet light kit
2. 4ft cord and 2, 3ft extension cords with plugs and EE081 dimmer.
3. Uses 120V, type G8 or T4, 20W xenon bulbs(included)
4. Up to 50% longer bulb life than halogen bulbs.
5. 120 Volt, no transformer required.
QUESTIONS, PROBLEMS, MISSING PARTS:
Before returning to your local Home Depot, please call our Customer Service Team at 1-877-527-0313 or visit www.homedepot.com.
Please reference SKU 818-313, UPC 008938101837 or SKU 830-676, UPC 008938102674.
GENERAL:
1. CAUTION: To reduce the risk of fire, electric shock, or injury to persons:
a. Use only insulated staples or plastic ties to secure cords.
b. Route and secure cords so that they will not be pinched or damaged when the cabinet is closed.
c. Position the under cabinet light with respect to the cabinet so the lamp replacement instruction can be read during re-lamping.
d. Not intended for recessed installation in ceilings or soffits.
2. CAUTION: To prevent the risk of fire, do not install in a compartment smaller than 12 x 12 x 12 inches.
3. CAUTION: To prevent the risk of fire, route and secure cords to avoid the likelihood of the cord making contact with the light.
4. CAUTION: LIGHTED LAMPS ARE HOT! To prevent the risk of fire, do not place fixtures face down on any surface and turn
them on.
5. Injury to persons, damage to the lamp or mounting surface may result if the lamp is not secure to the mounting surface. To reduce
the likelihood of such injury or damage, mount only on a wood or particleboard surface that is mechanically sound.
IMPORTANT SAFETY INSTRUCTIONS
This portable luminaire has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This
plug will fit only one way into a polarized outlet. If the plug does not insert fully into the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician for assistance. Never use with an extension cord unless plug can be fully inserted. Do not alter the plug
in any way as serious injury or damage may result.
ILLUMINATED LAMP IS HOT!
WARNING – To reduce the risk of FIRE, ELECTRIC SHOCK, EXPOSURE TO EXCESSIVE UV RADIATION, OR INJURY TO
PERSONS:
1. CAUTION: To reduce the risk of fire, electric shock, or injury to persons be sure turn the power off prior to installation and when
not in use.
2. CAUTION: To reduce the risk of fire, electric shock, or injury to persons use only Max. 120V, 8A luminaire.
3. CAUTION: To reduce the risk of fire, electric shock, or injury to persons use only one SPT-2, 18AWG, 2 conductor wire.
4. CAUTION: Turn off/unplug fixture and allow it to cool before replacing bulb (lamp).
5. CAUTION: Bulb (lamp) gets HOT quickly! Do not touch lighted bulb (lamp). Use only the switch/plug when turning the lights
on/off.
6. CAUTION: Do not touch hot lens, guard, or enclosure.
7. CAUTION: Do not remain in light if skin feels warm.
8. CAUTION: Do not look directly at lighted bulb.
9. CAUTION: Do not touch the bulb at any time. Use a soft cloth. Oil from skin may damage bulb.
10. CAUTION: Do not allow anything to come in contact with the lights, such as the power cords, plastics, paper goods or any
material that may be combustible.
11. Do not operate the lamp with a missing or damaged lens; lens acts as guard/shield and UV light filter.
12. This cabinet light is not intended for illumination of aquariums.
13. This cabinet light is not intended for installation in plastic cabinets.
14. This cabinet light is not intended for installation in wet locations.
15. When re-lamping, lens cover is to be turned and removed. Follow the re-lamping instructions for removing bulb inside of the
fixture.
16. Not intended for installation inside built-in furnishings such as a kitchen cabinet, china cabinet, or trophy case.
17. CAUTION: To reduce the risk of fire, electric shock, or injury to persons install only in cabinets where the top of the cabinet
light housing is not enclosed.
18. The NATIONAL electrical code does not permit cords to be concealed where damage to insulation may go unnoticed. To prevent
the risk of fire, do not run cord behind walls, ceilings, soffits, or cabinets where it may be inaccessible for examination. Cord
should be visually examined periodically and immediately replaced if any damage is noted.
CAUTION: Risk of electric shock. Do not strip wires. Cut off end of cord cleanly. Proper polarization must be maintained, examine
the cord carefully before assembling this product. If one of the wires is marked with stripes, grooves or ridges on the outer surface of
the insulation, attach that wire to the white-colored terminal. If neither wire is marked, strip a small amount of insulation from the end
of both wires and check to see whether either of the wires is white in color. If so, the white wire should be connected to the white-
colored terminal. After identifying the white wire, cut end of cord cleanly before attaching the wires to the terminals.
SAVE THESE INSTRUCTIONS
TOOLS REQUIRED FOR ASSEMBLY & INSTALLATION (not included):
Ladder Electrical tape Wire stripper Gloves Flathead screwdriver Phillips screwdriver
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
x6 Cabinet fixture x 6 Plug x 2- 3 ft cord x1 dimmer x6 G8 xenon bulb x1 Hardware Packet
Box