Installation Guide

Page 21
ASSEMBLAGE:
Page 4
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
1ea Hex Nut (#5) 1ea Nipple (#6) 1ea Shade (#7)
1ea Washer (#8) 1ea Bottom Cover (#9) 1ea Finial (#10)
ASSEMBLY INSTRUCTIONS:
1. Carefully unpack the fixture. Lay out all parts on a clean surface.
2. Unscrew the Finial (#10) from the Nipple (#6). Screw the Nipple (#6) into
the Hex Nut (#2). Tighten the Hex Nut (#5) against the Hex Nut (#2) to
secure the Nipple (#6).
3. Before continuing Assembly, please proceed to the Installation Instructions.
4. Install the GU24 compact fluorescent light Bulb (#4) in the Socket (#3). To
install the Bulb (#4), line up the prongs on the base of the Bulb (#4) with
the matching holes in the Socket (#3) and insert the Bulb (#4) into the
Socket (#3). Next, twist the base of the Bulb (#4) clockwise until the Bulb
(#4) locks into place (about 1/4 to 1/2 turn).
5. Place the Shade (#7) over the Nipple (#6). Screw the Washer (#8) onto the
Nipple (#6). Place the Bottom Cover (#9) over the Nipple (#6). Screw the
Finial (#10) onto the Nipple (#6) to secure the Shade (#7) and the Bottom
Cover (#9).