Item #1006351491 Model #EHD82620-3-BN USE AND CARE GUIDE KENDALL MANOR 6 IN. 3-LIGHT BRUSHED NICKEL VANITY LIGHT WITH CLEAR GLASS SHADES Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday. 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this lighting fixture.
Table of Contents Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 What is covered. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 What is not covered. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Pre-Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Planning Installation . . . . . . . .
Pre-Installation PLANNING INSTALLATION Before beginning the installation, make sure all the parts are included using the Hardware Included and Package Contents sections. If any part is missing or damaged, do not attempt to assemble, install, or operate the product. NOTE: To avoid damaging this product, place it on a a soft, non-abrasive surface, such as carpet or cardboard.
Pre-Installation (continued) PACKAGE CONTENTS A B C E D BULB (NOT INCLUDED) Part Description Quantity A Fixture body 1 B Threaded cap 2 C Shade 3 D Socket ring 3 E Socket ring tool 1 4
Installation 1 2 Installing the mounting bracket Connecting the wires □ Strip 3/4 in. of the insulation from the ends of the fixture wires. IMPORTANT: Disconnect the power at the main fuse box. □ Loosen the ground screw on the mounting bracket (CC). Wrap the house ground wire (copper) around the ground screw on the mounting bracket (CC). Leave enough ground wire to attach to the fixture ground wire. Twist the end of the fixture ground wire and the end of the house ground wire together.
Installation (continued) 3 4 Connecting the wires (continued) □ Twist the end of the house lead wire (black) and the end of the fixture lead wire together. Twist a wire nut (AA) onto the ends of the wires. Completely tighten the wire nut (AA) to secure the wires together. Installing the fixture to the wall □ Place the backplate of the fixture over the mounting bracket (CC). Pass the holes in the backplate over the ends of the fixture mounting screws on the mounting bracket (CC).
Installation (continued) 5 Installing the shades and bulbs □ Raise one shade (C) up to the fixture. Pass the hole in the top of the shade (C) over one socket. □ Using the socket ring tool (E), screw one socket ring (D) onto the socket. Tighten the socket ring (D) to secure the shade (C) in place. DO NOT over tighten the socket ring (D). □ Repeat the above steps to install the remaining shades (C). □ Screw the recommended bulbs (E26 Edison bulb type, not included) into the sockets.
Maintenance WARNING: Before you perform any cleaning or maintenance work, turn off the electricity at the main circuit breaker panel. Care and Cleaning □ Wipe the fixture with a dry, soft cloth. □ Do not use any cleaners with chemicals, solvents, or harsh abrasives. Troubleshooting Problem The light bulb will not turn on. Possible Cause Solution A bulb is burned out. □ Replace the light bulb. The power is off. □ Ensure the power supply is on. There is a faulty wire connection. □ Check the wiring.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday. 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
