Installation Guide

8 a.m. - 6 p.m., EST, Monday - Friday
1-877-527-0313
Installation
Installation
Part Description
Short straight rod (6 in.)
Long straight rod (12 in.)
B
A
C
Fabric shade assembly
D
Canopy
E
F
Threaded rod assembly (7 in.)
Diffuser
TOOLS REQUIRED
Hardware not shown to actual size.
HARDWARE INCLUDED
A
F
B
C
4
3
1
Questions, problems, missing parts? Before returning to store,
HOMEDEPOT.COM
Safety Information
Warranty
PACKAGE CONTENTS
Pre-Installation
call Commerial Electric Customer Service
Pre-Installation
A
EE
F
FF
D
D
E
Quantity
1
1
2
1
1
1
Assembling the rods
NOTE:
D
E
Retain this manual for future use.
□
Thread the xture wires up through the canopy (A).
2
Attaching the canopy to the straight rod
Secure the threaded rod assembly (D) to the fabric
shade (E), and tighten it using the hex nut on the
threaded rod assembly (D).
Install the light bulbs (sold separately).
Installing the threaded rod assembly
and bulb
□
Screw the rod assembly into the canopy (A).
□
Installing the diffuser
Place the diffuser (F) and the steel washer (EE) onto
the threaded rod assembly (D), and secure them with
the diffuser nut (FF).
□
□
□
Screw the rods (B,C) together to form one
long rod.
E
B
C
USE AND CARE GUIDE
PENDANT FIXTURE
We appreciate the trust and condence you have placed in Hampton Bay through the purchase of this pendant xture.
We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of
products available for your home improvement needs. Thank you for choosing Hampton Bay!
THANK YOU
Item #**********
Model #ES4761OB4-B
Troubleshooting
Ladder Gloves
Safety goggles
Problem Possible Cause Solution
The light bulb will not
illuminate.
The light bulb is burned
out.
Replace the light bulb.
The power is off.
Make sure the power supply is on.
There is a faulty wire
connection.
Check the wiring.
Contact a quali
ed and licensed
electrician if you are not comfortable
troubleshooting wiring problems.
There is a faulty switch.
Test or replace the switch.
There are crossed wires,
or the power wire is not
properly grounded.
Check the wire connections.
Phillips screwdriver Electrical tape
Wirestripper
Installation
Contact the Customer Se
5-YEAR LIMITED WARRANTY
rvice Team at 1-877-527-0313 or visit www.homedepot.com.
or workmanship, the product must be returned, with a copy of the bill of sale as proof of purchase, to the
original place of purchase. The manufacturer will, at its option, repair, replace, or refund the purchase price
excludes liability for direct, incidental, or consequential damages. Some states do not allow exclusions
or limitations on an implied warranty, so the above exclusions and limitations may not apply. This warranty
of ve year(s) from the date of purchase. If within this period the product is found to be defective in material
□
□
□
Read all instructions prior to beginning the
installation process.
Make sure the power is turned off at the
electrical panel box before beginning your
installation. Turning the power off at the wall
switch is not sufcient to prevent electrical
shock.
IMPORTANT SAFETY INSTRUCTIONS
(Save These Instructions)
This xture is intended to be mounted to a 4 in.
square x 2-1/8 in. deep metal octagon outlet box.
The box must be directly supported by the
building structure.
CAUTION: Keep the lamp away from
materials that may burn.
CAUTION: Turn off/unplug the light and
allow it to cool before replacing the bulb.
WARNING: Do not install this lighting
system in a wet location.
Care and Cleaning
□
To clean the xture, rst disconnect the power to the xture by turning off the circuit breaker or by
removing the fuse at the fuse box.
□
□
CAUTION: Do not use chemical solvents or harsh
abrasives to clean the xture or components, as damage
may occur.
Use a dry or slightly dampened, clean cloth (use clean water, never use a solvent) to wipe the
interior and exterior surfaces of the xture.
Allow the xture to dry completely before power is restored.
□
All electrical connections must be in accordance
with local codes and the National Electrical Code.
If you are unfamiliar with methods of installing
electrical wiring, secure the services of a
qualied licensed electrician.
The fuse blows or the circuit
breaker trips when the light bulb
is illuminated.
7
Attaching the canopy to the ceiling
A
CC
DD
□
Raise the canopy (A) up to the outlet box.
□
□
Secure the canopy (A) to the mounting bracket
assembly (CC) using the decorative nuts (DD) provided.
Adjust the length of the mounting bracket assembly (CC)
studs and hex nuts if necessary.
Installation
5
Installing the mounting bracket assembly
CC
AA
DD
Make sure the power is off.
□
Pull the supply wires down out of the outlet box.
□
□
Attach the mounting bracket assembly (CC) to the existing
outlet box with the outlet box screws (AA) provided.
□
Outlet box
6
Making the electrical connections
BB
CC
□
□
□
Wrap electrical tape (not included) around the wire
connectors (BB), and ensure they are secure.
Push all excess wire and wire connections back
into the outlet box.
□
Attach the ground wire from the outlet box to the ground
screw on the mounting bracket (CC), which is green and
marked "GND".
Remove the pre-assembled decorative nuts (DD)
from the mounting bracket assembly (CC).
AA
Outlet box screws
x 2
BB
Wire connectors
x 3
CC
Mounting bracket
assembly
x 1
DD
Decorative nut
x 2
FF
Diffuser nut
x 1
EE
Steel washer
x 1
Connect the negative wires (raised ribs without writing)
from the xture to the negative wires from the supply
circuit, the positive wires (smooth with writing) from the
xture to the positive wires from the supply circuit, and the
ground wire (bare) from the xture to the ground wire from
the supply circuit using the wire connectors (BB).
CAUTION: Refer to the re-lamping label located on
the xture. Do not exceed the recommended wattage.