Item# 1000 527 851 Model# F10013AB USE AND CARE GUIDE KIDS ON WATER PUMP FOUNTAIN Questions, problems,missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this fountain. We strive to continually create quality products designed to enhance your home.
Table of Contents Table of Contents .......................................................... 2 Safety Information ......................................................... 2 Warranty ......................................................................... 3 Pre-Assembly ................................................................ 4 Planning Assembly ..................................................... 4 Package Contents ..................................................... 4 Assembly ...............
Warranty LIMITED WARRANTY This product is warranted to the user against missing parts, defective material and workmanship, under normal working conditions, for a period not to exceed the term noted on the chart below. This warranty period begins on the date of purchase by the original purchaser. Cement Product 90 days on construction, materials, paint and finish Pump 90 days This warranty covers only properly installed and maintained units.
Pre-Assembly PLANNING ASSEMBLY Unpack all parts from the packaging and ensure there are no missing or damaged parts. If any parts are missing or damaged, do not attempt to assemble or use the product. Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HAMPTONBAY.com. PACKAGE CONTENTS Part Description Quantity A Fountain Body 1 B Top Fountain 1 C Pump (Part No.
Assembly 1 Assembling the fountain body 2 Attaching the pump □ □ □ Select a flat, level surface for the fountain location. Place the base (A) onto the ground and ensure that it is level. Position the top fountain (B) over the base (A) and lead the water supply tube which is located under the top fountain through the pipe which is on the top of the fountain body.
Operation 1 Turning the pump on □ Connect the pump power cord to a GFCI outlet. Water begins to flow through the fountain. NOTE: To eliminate the possibility of water damage around your fountain, check for leaks and excessive splashing after the initial setup of your fountain. If the water flow from the basins is uneven then check to see if the fountain is level. It is highly recommended this fountain be placed in an area where it cannot be damaged should the area become wet and unstable.
Care and Maintenance (continued) Preventing Mosquitos □ If mosquitoes are a problem in your area, it is recommended to run the fountain as much as possible to prevent standing water, where mosquitoes breed. You may also add a few drops of anti-mosquito water treatment, available at your local home and garden store, to the fountain water.
Troubleshooting Problem Solution □ Check to make sure the pump is connected to a power source. □ Check the water level to ensure the pump is completely submerged. Add water as needed. □ Check the water level to ensure the pump is completely submerged. Add water as needed. □ Check the supply tube for any kinks or folds and correct. □ Disconnect the pump from the power source. □ Disconnect the supply tube from the pump outlet.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 6 p.m.,EST,Monday-Friday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.