Item #1004 441 320 Model #FCS60610R-ST USE AND CARE GUIDE CRESTRIDGE 7PC DINING SET Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Table of Contents Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . 2 Save These Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Read All Instructions Before Use. . . . . . . . . . . . . . . . . . . . . . . 2 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 What is covered . . . . . . . . . . . . . . . . . . . . . . .
Warranty YEAR FRAME AND 2 YEAR FABRIC LIMITED WARRANTY WHAT IS COVERED three WHAT IS NOT COVERED It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover comercial use, hardware, acts of nature, fire, freezing and abusive use. In addition, purchased parts are not covered under this warranty. We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Pre-assembly (continued) HARDWARE INCLUDED NOTE: FF Part Description Quantity AA M6x15 Combination Bolt 38+2 BB M6x30 Combination Bolt 24+1 CC M6x25 Bolt 12+1 DD EE M6x25 Combination Bolt M8x30 Combination Bolt 2+1 12+1 FF Hex Wrench 2 CHAIR PACKAGE CONTENTS Part Description Quantity
Pre-assembly (continued) TABLE PACKAGE CONTENTS Part Description Quantity
Chair Assembly 1 Attach the sling bucket (A) to the right arm (B) using M6x30 combination bolts (BB) and an M8x30 combination bolt (EE), as shown below. Attach the connector bar (D) to the right arm (B) using M6x15 combination bolts (AA). D Insert the support bar (E) into the right arm (B). AA AA EE Do not tighten all bolts at this step. A BB E B BB 2 Attach the sling bucket (A) to the left arm (C) using M6x30 combination bolts (BB) and an M8x30 combination bolt (EE), as shown below.
Chair Assembly (continued) 3 4 Once all of the bolts are in place, fully tighten all the bolts using the hex wrench (FF).
Table Assembly 1 Attach the table legs (G) and the support tubes (H) to the table rim (F) 2 The g (DD).
Table Assembly (continued) 3 the bolts using the hex wrench (FF). Care and Cleaning Do not clean with abrasive materials, bleach or solvents.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
