Item # 000 000 Model # FCS70357-ST USE AND CARE GUIDE STATESVILLE 7-PIECE SLING PADDED DINING SET Questions, problems, missing parts? Before returning to the store call Hampton Bay Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this dining set. We strive to continually create quality products designed to enhance your home.
Table of Contents Table of Contents ........................................................ 2 Safety Information ....................................................... 2 Product Caution .................................................................... 2 Safety Warnings ..................................................................... 2 Warranty ........................................................................ 2 What is Covered .................................................................
Pre-Assembly PLANNING ASSEMBLY Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. NOTE: More than one person may be required to assemble this product. HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Assembly (continued) STATIONARY CHAIR PACKAGE CONTENTS A C B E D Part Description Quantity A Chair bucket 4 B Left arm 4 C Right arm 4 D E Front connection bar Rear connection bar 4 4 4
Pre-Assembly (continued) SWIVEL CHAIR PACKAGE CONTENTS F H G E D I J Part Description Quantity D Front connection bar 2 E Rear connection bar 2 F Swivel chair bucket 2 G Left swivel chair arm 2 H I J Right swivel chair arm 2 Support bar Swivel base 2 2 5 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Assembly (continued) TABLE PACKAGE CONTENTS K L M Part N Description Quantity K Table top 1 L Table leg 4 M Support bar 2 N Leg connector 1 6
l Chair Assembly Stationary 1 Connecting the left arm to the chair bucket and the connection bars Place the left arm (B) on a soft surface. Attach the chair bucket (A) to the left arm (B) using M6x30 bolts (AA) and M6 washers (DD). Attach the front connection bar (D) and rear connection bar (E) to the left arm (B) using M6x18 bolts (CC) and M6 washers (DD). NOTE: Loosely tighten all the bolts using the hex wrench (HH). A AA D AA DD CC CC DD DD E DD CC CC DD DD B 7 HAMPTONBAY.
l Chair Assembly (continued) Stationary 2 Connecting the right arm to the chair bucket and the connection bars Place the right arm (C) on a soft surface. Attach the chair bucket (A) to the right arm (C) using M6x30 bolts (AA) and M6 washers (DD). Attach the front connection bar (D) and rear connection bar (E) to the right arm (C) using M6x18 bolts (CC) and M6 washers (DD). NOTE: Loosely tighten all the bolts using the hex wrench (HH).
l Chair Assembly (continued) Stationary 3 Tightening the bolts Once all of the bolts are in place, fully tighten the bolts. Turn the chair right side up. Ensure the chair is tightly assembled and stable before use. 9 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
l Swivel Chair Assembly 1 Connecting the support bar to the chair bucket Place the swivel chair bucket (F) upside down on a soft surface. Attach the support bar (I) to the bottom of the swivel chair bucket (F) using M8x20 hex bolt (EE), M8 spring washer (FF) and M8 washer (GG). NOTE: Loosely tighten all the bolts using the wrench (II).
l Swivel Chair Assembly (continued) 2 Connecting the left arm to the chair bucket and the connection bars Attach the left swivel chair arm (G) to the swivel chair bucket (F using M6x30 bolts (AA) and M6 washers (DD). Attach the front connection bar (D) and rear connection bar (G) to the left swivel chair arm (F) using M6x18 bolts (CC) and M6 washers (DD). NOTE: Loosely tighten all the bolts using the hex wrench (HH). F AA D DD AA E DD CC DD CC DD CC CC DD G DD 11 HAMPTONBAY.
l Swivel Chair Assembly (continued) 3 Connecting the right arm to the chair bucket Attach the right swivel chair arm (H) to the swivel chair bucket (F) using M6x30 bolts (AA) and M6 washers (DD). Attach the front connection bar (D) and rear connection bar (E) to the right swivel chair arm (H) using M6x18 bolts (CC) and M6 washers (DD). NOTE: Loosely tighten all the bolts using the hex wrench (HH).
l Swivel Chair Assembly (continued) 4 Tightening all bolts, connecting the support bar to the swivel base Turn the chair right side up. Once all of the bolts are in place, fully tighten the bolts. Insert the support bar (I) into the swivel base (J). I J 13 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
l Swivel Chair Assembly (continued) 5 Checking the chairs Ensure all connections are secure before use.
l Table Assembly 1 Attaching the table legs and the support tubes Place the table top (K) upside down on a soft surface. Attach the table legs (L) and the support bar (M) to the table top (K) using M6x18 bolts (CC) and M6 washers (DD). NOTE: Loosely tighten all the bolts using the hex wrench (HH). L CC CC DD DD CC CC DD DD M K 15 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
l Table Assembly (continued) 2 Attaching the leg connector to the table legs and the support tube Attach the leg connector (N) to the table legs (L) and the support tubes (M) using M6x25 bolts (BB) and M6 washers (DD). NOTE: Loosely tighten all the bolts using the hex wrench (HH).
l Table Assembly (continued) 3 Tightening the bolts Once all of the bolts are in place, fully tighten the bolts. Turn the table right side up. Ensure all connections are secure before use. Care and Cleaning For best results, clean the frame and fabric with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt particles that may accumulate. Do not clean with abrasive materials, bleach, or solvents. Store the set in a dry, sheltered place when not in use.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
Artículo núm. 000 000 Modelo núm. FCS70357-ST GUÍA DE USO Y MANTENIMIENTO JUEGO DE COMEDOR STATESVILLE, DE ESLINGA Y ACOLCHADO, CON CUBIERTA DE MESA DE LOSA DE CERÁMICA, 7 PIEZAS ¿Preguntas, problemas o piezas perdidas? Antes de devolver a la tienda a la tienda, llama al Servicio al Cliente de Hampton Bay De 8 a.m. a 7 p.m. (Hora Estándar del Este), entre lunes y viernes, y de 9 a.m. a 6 p.m. (Hora Estándar del Este) los sábados. 01-800-00-4633 HOMEDEPOT.COM.
Tabla de contenido Tabla de contenido ...................................................... 2 Información de Seguridad ........................................... 2 Precaución sobre el producto .............. ...................................... 2 Advertencias de seguridad ..................................................... 2 Garantía ........................................................................ 2 Qué cubre la garantía ......................................................................
Preensamblaje PLANIFICACIÓN DEL ENSAMBLAJE Lee todas las instrucciones antes de ensamblar. Para evitar daños al producto, ensámblalo sobre una superficie blanda no abrasiva, como alfombra o cartón. NOTA: Se pudiera requerir más de una persona para ensamblar este producto. SE INCLUYEN HERRAJES NOTA: Los herrajes no se muestran en tamaño real.
Preensamblaje (continuación) CONTENIDO DEL PAQUETE DE LA SILLA FIJA A C B E D Pieza Descripción Cantidad A Asiento/respaldo 4 B Brazo izquierdo 4 C Brazo derecho 4 D Conexión fronta 4 E Barra de conexión trasera 4 4
Preensamblaje (continuación) CONTENIDO DEL PAQUETE DE LA SILLA GIRATORIA F H G E D I J Pieza Descripción Cantidad D Barra de conexión frontal 2 E Barra de conexión trasera 2 F Asiento/respaldo 2 G Brazo izquierdo de la silla giratoria 2 H I J Brazo derecho de la silla giratoria 2 Tubo de soporte Base giratoria 2 2 5 HOMEDEPOT.COM.MX Llama al 01-800-00-46633 para asistencia adicional.
Preensamblaje (continuación) CONTENIDO DEL PAQUETE DE LA MESA L K M N O Pieza Descripción Cantidad K Losa 1 L Tapa del orificio 4 M Borde de la mesa 2 N Conector de las patas 1 O Pata de la mesa 4 6
l Ensamblaje de la silla fija conectar el brazo izquierdo al asiento/respaldo de la silla y a las 1 Cómo barras de conexión Coloca el brazo izquierdo (B) sobre una superficie suave. Conecta el asiento/respaldo de la silla (A) al brazo izquierdo (B) con pernos M6x30 (AA) y arandelas M6 (EE). Coloca la barra de conexión frontal (D) en el brazo izquierdo (B) con pernos M6x30 (AA), pernos M6x18 (CC) y arandelas M6 (EE).
l Ensamblaje de la silla fija (continuación) conectar el brazo derecho al asiento/respaldo de la silla y a las 2 Cómo barras de conexión Cómo conectar el brazo derecho al asiento/respaldo de la silla y a las barras de conexión. Coloca el brazo derecho (C) sobre una superficie suave. Conecta el asiento/respaldo la silla (A) al brazo derecho (C) con pernos M6x30 (AA) y arandelas M6 (EE).
l Ensamblaje de la silla fija (continuación) 3 Cómo apretar los pernos Una vez que todos los pernos estén en su lugar, apriétalos bien. Voltea la silla a su posición normal. Asegura que la silla esté firmemente ensamblada y estable antes de usarla. 9 HOMEDEPOT.COM.MX Llama al 01-800-00-46633 para asistencia adicional.
l Ensamblaje de la silla giratoria 1 Cómo conectar el tubo de soporte al asiento/respaldo de la silla giratoria Coloca el asiento/respaldo de la silla giratoria (F) boca abajo sobre una superficie suave. Fija el tubo de soporte (I) a la parte inferior del asiento/respaldo de la silla giratoria (F) con el perno hexagonal M8x28 (FF), las arandelas de resorte M8 (GG) y las arandelas M8 (HH). NOTA: Aprieta ligeramente todos los pernos con la llave (JJ).
l Ensamblaje de la silla giratoria (continuación) conectar el brazo izquierdo al asiento/respaldo de la silla giratoria 2 Cómo y a las barras de conexión Conecta el brazo izquierdo de la silla giratoria (G) a su asiento/respaldo (F) con pernos M6x30 (AA) y arandelas M6 (EE). Coloca la barra de conexión frontal (D) en el brazo izquierdo de la silla giratoria (G) con pernos M6x30 (AA), pernos M6x18 (CC) y arandelas M6 (EE).
l Ensamblaje de la silla giratoria (continuación) conectar el brazo derecho al asiento/respaldo de la silla giratoria y 3 Cómo a las barras de conexión Conecta el brazo derecho de la silla giratoria (G) al asiento/respaldo de ella (F) con pernos M6x30 (AA) y arandelas M6 (EE). Coloca la barra de conexión frontal (D) en el brazo derecho de la silla giratoria (H) con pernos M6x30 (AA), pernos M6x18 (CC) y arandelas M6 (EE).
l Ensamblaje de la silla giratoria (continuación) 4 Apretar todos los pernos al conectar el tubo de soporte a la base giratoria Voltea la silla a su posición normal. Una vez que todos los pernos estén en su lugar, apriétalos bien. Inserta el tubo de soporte (I) en la base giratoria (J). I J 13 HOMEDEPOT.COM.MX Llama al 01-800-00-46633 para asistencia adicional.
l Ensamblaje de la silla giratoria (continuación) 5 Cómo inspeccionar las sillas Garantiza que todas las conexiones estén seguras antes de usarlas.
l Ensamblaje de la mesa 1 Cómo fijar las patas de la mesa al borde de esta Coloca el borde de la mesa (M) boca abajo sobre una superficie suave. Fija las patas de la mesa (O) al borde de esta (M) con los pernos M6x20 (BB) y las arandelas M6 (EE). NOTA: Aprieta ligeramente todos los pernos con la llave hexagonal (II). BB EE BB EE O M 15 HOMEDEPOT.COM.MX Llama al 01-800-00-46633 para asistencia adicional.
l Ensamblaje de la mesa (continuación) 2 Cómo ensamblar el conector de las patas a las patas de la mesa Alinea los orificios del conector de la pata (N) con aquellos en el interior de cada pata de la mesa (O). Fija el conector de las patas (N) a las patas de la mesa (O) y los tubos de soporte (M) usando pernos M6x15 (DD) y arandelas M6 (EE). NOTA: Aprieta ligeramente todos los pernos con la llave hexagonal (II).
l Ensamblaje de la mesa (continuación) 3 Cómo colocar la tapa de orificios y la losa en el borde de la mesa Una vez que todos los pernos estén en su lugar, apriétalos bien. Voltea la mesa a su posición normal. Con cuidado, coloca las losas (K) y la tapa de orificios (L) sobre el borde de la mesa (M). L 17 K HOMEDEPOT.COM.MX Llama al 01-800-00-46633 para asistencia adicional.
l Ensamblaje de la mesa (continuación) 4 Remplazar la tapa de orificios con la losa Con cuidado, remplaza la tapa de orificios (L) con la losa (K), si lo deseas.
l Ensamblaje de la mesa (continuación) 5 Cómo inspeccionar la mesa Garantiza que todas las conexiones estén seguras antes de usarlas. Cuidado y limpieza Para mejores resultados, limpia el armazón y la tela con un paño húmedo y sécalos completamente. Esto ayudará a prevenir el moho al quitar las partículas de polvo que puedan acumularse. No limpiar con materiales abrasivos, blanqueador ni solventes. Guarda el juego en un lugar seco y protegido cuando no esté en uso.
¿Preguntas, problemas o piezas perdidas? Antes de devolver a la tienda a la tienda, lama al Servicio al Cliente de Hampton Bay De 8 a.m. a 7 p.m. (Hora Estándar del Este), entre lunes y viernes, y de 9 a.m. a 6 p.m. (Hora Estándar del Este) los sábados. 01-800-00-46633 HOMEDEPOT.COM.MX Conserva este manual para uso en el futuro.