Item # 000 000 Model # FCS70357CS USE AND CARE GUIDE STATESVILLE SLING PADDED SWIVEL CHAIR 2-PK Questions, problems, missing parts? Before returning to the store call Hampton Bay Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of these chairs. We strive to continually create quality products designed to enhance your home.
Table of Contents Table of Contents ........................................................ 2 Safety Information ....................................................... 2 Product Caution .................................................................... 2 Safety Warnings ..................................................................... 2 Warranty ........................................................................ 2 What is Covered .................................................................
Pre-Assembly PLANNING ASSEMBLY Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. NOTE: More than one person may be required to assemble this product. HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Assembly (continued) PACKAGE CONTENTS A C B F E D G Part Description Quantity A Chair bucket 2 B Left arm 2 C Right arm 2 D Support bar 2 E F G Front connection bar 2 Rear connection bar Swivel base 2 2 4
l Assembly 1 Connecting the support bar to the chair bucket Place the chair bucket (A) upside down on a soft surface. Attach the support bar (D) to the chair bucket (A) using M8x20 hex bolt (DD), M8 spring washers (EE) and M8 washers (FF), as shown below. NOTE: Loosely tighten all bolts using the wrench (HH). DD DD EE EE FF FF A D 5 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
l (continued) Assembly 2 Connecting the left arm to the chair bucket and the connection bars Attach the left arm (B) to the chair bucket (A) using M6x30 bolts (AA) and M6 washers (CC). Attach the front connection bar (E) and rear connection bar (F) to the left arm (B) using M6x18 bolts (BB) and M6 washers (CC). NOTE: Loosely tighten all bolts using the hex wrench (GG).
l (continued) Assembly 3 Connecting the right arm to the chair bucket and the connection bars Attach the right arm (C) to the chair bucket (A) using M6x30 bolts (AA) and M6 washers (CC). Attach the front connection bar (E) and rear connection bar (F) to the right arm (C) using M6x18 bolts (BB) and M6 washers (CC). NOTE: Loosely tighten all bolts using the hex wrench (GG). A E BB CC BB CC AA AA F CC BB BB CC CC CC C 7 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
l (continued) Assembly 4 Tightening all bolts, connecting the support bar to the swivel base Once all bolts are in place, fully tighten all bolts including screws preassembled by factory. Insert the support bar (D) into the swivel base (G).
l (continued) Assembly 6 Checking the chairs Ensure all connections are secure before use. Care and Cleaning For best results, clean the frame and fabric with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt particles that may accumulate. Do not clean with abrasive materials, bleach, or solvents. Store the chairs in a dry, sheltered place when not in use.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
