Item # 1000 050 970 Model # FCS80231RST USE AND CARE GUIDE BELLEVILLE 4-PIECE DEEP SEATING SET Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU mpton Bay through the purchase of this deep seating set. We strive to continually create quality products designed to enhance your home.
Table of Contents Table of Contents .......................................................... 2 Safety Information ....................................................... 2 Product Caution .................................................................... 2 Safety Warnings ..................................................................... 2 Warranty ........................................................................ 2 What is Covered ...............................................................
Pre-Assembly PLANNING ASSEMBLY Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. NOTE: More than one person may be required to assemble this product. NOTE: Hardware not shown to actual size.
Pre-Assembly (continued) CHAIR PACKAGE CONTENTS A C B D Part Description Quantity A Sling bucket 2 B Right arm 2 C Left arm 2 D Back bar 2 4
Pre-Assembly (continued) GLIDER PACKAGE CONTENTS E F G H Part Description Quantity E Sling bucket 1 F Right arm 1 G Left arm 1 H Glider base 1 5 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Assembly (continued) TABLE PACKAGE CONTENTS I J K L Part Description Quantity I Tile 6 J Table rim 1 K Table leg 4 L Leg connector 1 6
l Chair Assembly 1 Attaching the chair arms to the chair bucket Attach the sling bucket (A) to the left arm (C) using M6x20 combination bolts (AA) and M6x30 combination bolt (BB), as shown below. Place the back bar (D) into the left arm (C). Repeat this step for the right arm (B). NOTE: Loosely tighten all bolts using the hex wrench (GG. ). 7 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
l Chair Assembly (continued) 2 Securing the back bar Turn the chair right side up. Secure the back bar (D) to the chair arms (B and C) using M6x25 bolts (CC). NOTE: Loosely tighten all bolts using the hex wrench (GG). .
l Chair Assembly (continued) 3 Tightening all bolts Tighten all the bolts. Check and ensure the chair is tightly assembled and stable before use. 9 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
l Glider Assembly 1 Connecting the glider arms to the glider bucket Attach the right arm (F) to the front of the sling bucket (E) using M6x20 combination bolt (AA). Attach the right arm (F) to the back of the sling bucket (E) using M6x30 combination bolts (BB). Repeat this procedure to attach the left arm (G) to the sling bucket (E). NOTE: Loosely tighten the bolts using the hex wrench (GG).
l Glider Assembly (continued) 2 Connecting the arms to the connection bar Attach the glider base (H) to the glider arms (F and G) using M6x18 countersunk bolts (EE) and M6 plastic washers (FF) The front and back of the glider base (H) are different and will not assemble in reverse. NOTE: Loosely tighten the bolts using the hex wrench (GG). . 11 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
l Glider Assembly (continued) 3 Tightening all bolts Turn the glider right side up. Tighten all the bolts. Check and ensure the glider is tightly assembled and stable before use.
l Table Assembly 1 Connecting the table legs Place the table rim (J) upside down on a soft surface. Attach each of the table legs (K) to the table rim (J) using M6x20 Combination bolts (AA). NOTE: Loosely tighten the bolts using the hex wrench (GG). . 13 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
l Table Assembly (continued) 2 Connecting the leg connector to the table legs Align the holes on the leg connector (L) with the holes on the inside of each table leg (K). Attach the leg connector (L) to the table legs (K) using M6x15 combination bolt (DD). Tighten all the bolts.
l Table Assembly (continued) 3 Adding the tiles Turn the table right side up. Ensure all connections are secure. Carefully place the tiles (I) onto the table rim (J). Check and ensure the table is tightly assembled and stable before use. I ò J Care and Cleaning For best results, clean the frames with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt particles that may accumulate. Do not clean with abrasive materials, bleach, or solvents.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
