Amelia Springs Motion Metal Outdoor Lounge Chair with Spa Cushion Seat and back frame Hex Wrench M8 washer 4 4 Back cushion 2 2 2 M8 nut Seat Cushion Base frame 2
ASSSEMBLING THE CHAIR SEAT AND BACK FRAME TO THE BASE FRAME • Insert the Seat and Back Frame (A) to the Base Frame (B). See Figure. • Secure the Seat and Back Frame (A) to the Base Frame (B) with the M8 Washers (BB) and the M8 Nuts (AA). Securely tighten the Nuts (AA) with the Hex Wrench (CC). See Figure. FINISHING ASSEMBLY • Place the Seat Cushion (C) and the Back Cushion (D) on the chair. See Figure. The chair is ready for your enjoyment. Please repeat steps 1-3 to assemble the other chair.
Amelia Springs Square Metal Outdoor Coffee Table A(1) Table Top BB(4) M6X35 Bolt B(4) Table Leg CC(12) M6 Flat Washer C(1) Leg Connector Ring DD(12) M6 Lock Washer AA (8) M6X20 Bolt EE(1) Socket Wrench
1 ASSEMBLING THE TABLE LEGS TO THE TABLE TOP AA B DD CC A Carefully turn the table top upside down on a soft non-abrasive surface. Loosely attach the Table Legs (B) to the Table Top (A) by aligning the bolt holes on the Table Legs (B) with those on the Table Top (A) and loosely securing with the Bolts (AA), Lock Washers (DD) and Flat Washers (CC). Do not fully tighten the Bolts (AA) completely until the assembly is complete.