Instructions / Assembly

9 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued)
3
Attaching the upper beam and bottom
b
eam 4
Attaching the gas cylinder support
□
□
NOTE: Do not tighten bolts completely until assembly is
complete.
□
NOTE: Do not tighten bolts completely until assembly is
complete.
6
□
NOTE: Do not tighten bolts completely until assembly is
complete.
□
NOTE: Do not tighten bolts completely until assembly is
complete.
5
H
F
J
K
AA
BB
C
B
L
D
K
J
CC
AA
BB
O
D
O
Attaching the door
Attaching the handle assembly
Attach the Upper Beam (J) to the Front-Left Leg (H) and the
Front-Right Leg (F) with four Bolts (AA) and four Washers
(BB) using the Hex Screw Driver (CC).
Attach the Bottom Beam (K) to the Front-Left Leg (H) and the
Front-Right Leg (F) with four Bolts (AA) and four Washers (BB)
using the Hex Screw Driver (CC).
CC
AA
BB
CC
Attach the Gas Cylinder Support (L) to the Right Panel (B) and the Left
Panel (C) with four Bolts (AA) and four Washers (BB) using the Hex
Screw Driver (CC).
Attach the Door (D) to the Upper Beam (J) and the Bottom Beam
(K) with two Bolts (AA) and two Washers (BB) using the Hex Screw
Driver (CC).
Un-screw the Handle Assembly (O), attach the Handle to the Door (D)
using a Phillips screw driver, then screw it tightly.