Instructions / Assembly

Assembly

ATTACHING THE SEAT

FRAME TO THE BACK FRAME

ATTACHING THE LEFT AND

RIGHT ARM

□ Remove all the protective material carefully. Avoid

cutting the surface of the furniture while removing the

packaging material on all components.

□ Place the Seat Frame (A) on a soft, flat non-abrasive

surface.

□ Loosely attach the Back Frame (B) to the Seat Frame

(A) with the M6x30 Hex Bolts (BB) and d6xD12x1 Flat

Washers (FF). Do not put the M6 Hex Bolt Caps (JJ)

on the M6x30 Hex Bolts (BB) until the assembly is

complete.

NOTE: Do not tighten bolts completely until assembly

is complete.

□

Loosely attach the Left Arm Frame (D) to the Seat

Frame (A) using the M6x30 Hex Bolts (BB) and

d6xD12x1 Flat Washers (FF).

□

Loosely attach the Left Arm Frame (D) to the Back

Frame (B) by aligning the bolt holes in the Left Arm

Frame (D) with the bolt holes in the Back Frame (B)

and securing with the M6x55 Socket Bolts (CC) and

d6xD12x1 Flat Washers (FF).

□

Repeat the same process above to attach the Right

Arm Frame (C) to Seat Frame (A) and Back Frame

(B)

□ Once all the bolts are in place, securely tighten all the

M6x30 Hex Bolts (BB) with the Hex Wrench (LL) and

tighten all the M6x55 Socket Bolts (CC) with the Hex

Screw Driver (MM). Do not put the M6 Hex Bolt Caps

(JJ) and Socket Bolt Caps (KK) on the bolts until all

assembly is complete.