Full Product Manual

7 HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Assembly

ASSEMBLING THE BASE

ASSEMBLING THE TOP TO

THE BASE

□ Remove all protective material carefully. Avoid

scratching the surface of the frames while removing

the packaging material. Loosely attach the Table

Legs (B) to the Leg Connector Ring (C) with Bolts

(AA) through the Lock Washers (GG) and Flat

Washers (FF). See figure.

NOTE: Do not tighten bolts completely until assembly

is completed.

□ Place the Table Top (A) up-side down. Align the bolt

holes on the assembled table base to those on the

Table Top (A). Secure the table base with Bolts (BB)

through Lock Washer (II), Flat Washers (HH) and the

table base. See figure.

NOTE: Do not tighten bolts completely until assembly

is completed.