Item #0000 000 000 Model #FHWS80105 USE AND CARE GUIDE HAYMONT WICKER SQUARE LP FIRE PIT Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this fire table. We strive to continually create quality products designed to enhance your home.
Table of Contents Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Propane (LP) Dangers and Warnings . . . . . . . . . . . . . . . . . 5 Hose & Regulator Assembly and Replacement . . . . . . . . . . 6 Glass Beads Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Pre-Assembly . . . . . . . . . . . . .
Safety Information (continued) WARNING: Fire table is for outdoor use only. Installation and repair should be done by a qualified service person. The appliance should be inspected before use and at least annually by a qualified service person. More frequent cleaning may be required as necessary. It is imperative that the control compartment, burners and circulating air passageways of the appliance are kept clean.
Safety Information (continued) The use of alcohol, prescription or non-prescription drugs may impair an individual’s ability to properly assemble or safely operate this outdoor fire table. DO NOT use in an explosive atmosphere. Keep gas fire table area clear and free from combustible materials, such as gasoline. This outdoor fire table is not to be installed or used in or on recreational vehicles and/or boats. Always use in accordance with all applicable local, provincial and national codes.
Safety Information (continued) ATTENTION: Any alteration of the outdoor fire table that is not specifically directed in the operations manual will void manufacturer warranty. PROPANE (LP) DANGERS AND WARNINGS LP GAS LP gas is flammable and hazardous if handled improperly. Familiarize yourself with its hazards before using any LP gas product. PROPANE HAZARDS Flammable, explosive under pressure, heavier than air and settles in pools in low areas. In its natural state, propane has no odor.
Safety Information (continued) HOSE AND REGULATOR ASSEMBLY AND REPLACEMENT This fire table comes equipped with a standard LP gas hose and regulator including the appliance side connection for a CGA No. 791 Cylinder Connection Device. The LP gas hose and regulator supplied with this fire table must be used. Only a hose and regulator specified by manufacturer can be used for replacement. The CGA No.
Warranty 1 YEAR FRAME LIMITED WARRANTY WHAT IS COVERED We warrant the frames to be free of manufacturing defects to the original purchaser for one year. WHAT IS NOT COVERED It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover commercial use, hardware, acts of nature, fire, freezing and abusive use. In addition, purchased parts are not covered under this warranty.
Pre-Assembly (continued) HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Assembly (continued) PACKAGE CONTENTS A J K I H B M L N D E E G C O F Part Description Quantity A Burner Lid 1 B C Table Top Door Frame 1 1 D Back Panel 1 E F Side Panel Door 2 1 G Tank Support 1 H I Glass Beads Square Burner Bowl 1 1 J Burner Ring 1 K L Pilot Housing Manual Electric Igniter 1 1 M Control Knob 1 N O Regulator/Hose AAA Battery 1 1 9 WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts specifi
Assembly 1 Attaching the Door Frame and Back Panel to the Table Top NOTE: Pay attention to the direction of control knob and the legs. They must be placed as the step shows. Place the table top (B) upside down on a soft surface. Attach the door frame (C) and back panel (D) to the table top (B) using M6x15 combination bolts (AA), as shown below. Do not tighten the bolts at this step. AA NOTE: Loosely tighten all the bolts using hex wrench (CC).
Assembly (continued) 3 Connecting the Tank Support Connect the tank support (G) to the door frame (C) and back panel (D) using M6x15 combination bolts (AA), as shown below. Once all of the bolts are in place, fully tighten all the bolts using the hex wrench (CC). AA G D C 4 Connecting the Door to the Door Frame Turn the fire table right side up. Insert the door (F) to the door frame (C), as shown below. F C 11 HAMPTONBAY.COM. Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued) 5 Placing the Glass Beads CAUTION: To ensure proper function, the screen on the pilot housing should be free of glass beads. Place the glass beads (H) into the square burner bowl (I). H I Burner Tube Do Not Block Opening Screen 6 Placing the Burner Lid WARNING: Surfaces on the fire table can remain extremely hot for a period after use. Allow 45 minutes to cool down before touching or moving the fire table. Place the burner lid (A) over the square burner bowl (I).
Operation 1 Installing the LP Gas Tank CAUTION: The LP gas tank must be properly disconnected and removed prior to moving this outdoor fire table. Make sure LP gas tank valve is closed. To operate, you will need one precision-filled standard grill LP gas tank with external valve threads. Loosen LP gas tank retainer bolt by turning counterclockwise. Place precision-filled LP gas tank upright into hole in outdoor fire table base so the tank valve is facing the gas line connection.
Operation (continued) 3 Disconnecting the LP Gas Tank NOTE: The LP gas tank must be properly disconnected and removed prior to moving this fire table. Before disconnecting make sure the LP gas tank valve is “CLOSED”. Disconnect regulator/hose assembly from LP gas by turning knob conterclockwise until it is loose. Place the protective cap cover on the LP gas tank and store it outdoors in a well-ventilated area out of direct sunlight.
Operation (continued) 5 Tank/Gas Line Connection Leak Test Make 2-3 oz. of leak detection solution by mixing one part liquid dishwashing soap with three parts water. Make sure the control knob is in the “OFF” position. Connect LP gas tank per “CONNECTING LP GAS TANK” section. Turn LP gas tank valve to “OPEN”. Using a spoon or a squirt bottle, pour several drops of solution over each spot marked “X.” a. If any bubbles appear, turn LP gas tank valve to “CLOSED”, reconnect and re-test. b.
Operation (continued) 7 Inserting the Door Insert the door (F). Now the fire table is complete and ready to use.
Operation (continued) CAUTION: Failure to follow these instructions could cause a fire or an explosion which can cause death, serious bodily injury or damage to property. WARNING: Never light burner with the cover on the outdoor fire table. CAUTION: Keep outdoor gas appliance area clear and free from combustible materials, gasoline and other flammable vapors and liquids. CAUTION: Do NOT obstruct flow of combustion and ventilation air.
Operation (continued) LIGHTING (CONTINUED) 11. If igniter does not light burner: a. Wearing heat-resistant gloves, position a long, lit match or long, lit butane lighter near the pilot housing. b. Push and turn control knob to “ON”. c. Remove match/lighter once burner is lit. 12. After lighting, observe the burner flame and make sure all burner ports are lit and flame height matches illustration on page 17.
Care and Maintenance Cleaning Surfaces Wipe surfaces clean with mild dishwashing detergent or baking soda mixed with water. For stubborn stains, use a citrus-based cleaner and a nylon scrubbing brush. Rinse clean with water. Allow to air dry. Before Storing Turn LP gas tank valve to “CLOSED”. Turn control knob to the “OFF” position. NOTE: A “poof” sound is normal as the last of the LP gas is burned. Disconnect LP gas tank per “Disconnecting LP Gas Tank” section. Clean all surfaces.
Troubleshooting The LP gas tank valve is closed. Make sure that the regulator is securely attached to the LP gas tank per the "Installing the LP Gas Tank" section. Then turn the LP gas tank valve to "OPEN." The LP gas tank is low or empty. Exchange, refill or replace the LP gas tank. Turn the LP gas tank valve to “CLOSED”. Wait 5 minutes for the gas to clear. Follow the steps in the “Checking for Leaks and Burner Connections” section. The LP gas leaks. The burner will not light using the igniter.
Troubleshooting (continued) The tank is out of gas. There is a sudden drop in gas flow, or the flame height is reduced. The overfilling prevention device may have been activated. There is an irregular flame pattern, or the flame does not run There is no gas flow. the full length of the burner. The flame is yellow or orange. Turn control knob to “OFF”. Wait 30 seconds and light the outdoor fire table per the “Lighting” section.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.